Organization and Information Support of Expert Reviews of I&C Systems Modernization at NPP of Ukraine - Nuclear Power Plant Instrumentation and Control Systems for Safety and Security - page 395

APPENDIX: ADDITIONAL READING
IAEA Scientific and Technical Publications
IAEA (2000). NS-G-1.1. Software for computer-based systems important to safety in nuclear power
plants. Safety guide . Vienna, Austria: IAEA.
IAEA. (1998). TECDOC-1016. Modernization of Instrumentation and Control in nuclear power Plants .
Vienna, Austria: IAEA.
IAEA. (1999). Modern Instrumentation and Control for Nuclear Power Plants. A Guidebook . Vienna,
Austria: IAEA.
The Main IEC Standards
IEC (2004). IEC 62138. Nuclear power plants - Instrumentation and control important for safety -
Software aspects for computer-based systems performing category B or C functions .
IEC (2006). IEC 60880. Nuclear power plants - Instrumentation and control systems important to safety
- Software aspects for computer-based systems performing category A functions . Ed. 2.
IEC (2007). IEC 62340. Nuclear power plants - Instrumentation and control systems important to safety
- Requirements for coping with common cause failure (CCF) .
Other Scientific and Technical Publications
Andrashov, A., et al. (2007). The static analysis of a program code procedure based on metrics profiling.
Radio electronic and computer systems, 8 , 184-188. (in Russian).
Courtois, P.-J. (2001). Software important to safety: the new IAEA Safety Guide and the common position
of European nuclear regulators. Proceedings of CNRA/CSNI Workshop on Licensing and Operating
Experience of Computer-based I&C Systems (pp. 117-128). Hluboka nad Vltavou, Czech Republic.
Courtois, P.-J. (2008). Justifying the Dependability of Computer-based Systems . Springer.
Eagle, E.O. (2012). Lessons learned from instrumentation and controls licensing reviews of combined
license applications that use earlier certified designs. Proceeding of 8th International topical meet-
ing on Nuclear Plant Instrumentation, Controls, and Human Machine Interface Technology (pp.
1283-1290). San Diego, USA: American Nuclear Society.
GOST 27.310. (1995). Dependability in technics. Failure Mode, Effect and Criticality Analysis. Basic
principles . Moscow, Russia: Publishing House of Standards. (in Russian).
Jung, I. (2012). Regulatory perspectives and lesson learned from USNRC new reactor instrumentation
and control licensing review. Proceeding of 8th International topical meeting on Nuclear Plant
Instrumentation, Controls, and Human Machine Interface Technology (pp. 733-742). San Diego,
USA: American Nuclear Society.
Klevtsov, A. (2008). The experience of nuclear and radiation safety expert reviewing of new and modern-
ized NPP'S instrumentation and control systems. Radio electronic and computer systems, 6 (33),
122-127. (in Russian).