Information Technology Reference
In-Depth Information
products' design within the student project in educational process at the Faculty of
Mechanical Engineering, University of Maribor.
10. References
Alber, B., Rieg, F. & Hackenschmidt, R. (2007). Product Design with High-tech-polymers -
Practical Use of CAE-tools with Cross-linked Simulations and Experimental
Verification.
Materialprüfung
, Vol.49, No. 7-8, pp. 402-407, ISSN 0025-5300
Ashby, M. F. (2005).
Materials selection in mechanical design
(3rd ed.), Elsevier, ISBN 0-7506-
6168-2
Ashby, M.F., & Johnson, K. (2005).
Materials and design
. Elsevier, ISBN 0-7506-5554-2
Askeland, D.R. & Fulay P.P. (2009).
Essentials of Materials Science & Engineering
(2nd ed.), CL-
Engineering, ISBN 0-4952-4446-5
ASM International (2003). Characterization and Failure Analysis of Plastics, ASM
International , ISBN 0-87170-789-6
Benzmüller, C., Sorge, V., Jamnik, M., & Kerber, M. (2008). Combined Reasoning by
Automated Cooperation.
Journal of Applied Logic
, Vol.6, pp. 318-342, ISSN 1570-8683
Budinski, G.K. & Budinski, M.K. (2010).
Engineering Materials
(9th ed.),
Pearson Prentice
Hall, ISBN 0-13-610950-0
Chen, R.Y., Sheu, D.D., Liu, C.M. (2007). Vague Knowledge Search in the Design for
Outsourcing Using Fuzzy Decision Tree.
Computers & Operations Research
, Vol.34,
pp. 3628-3637, ISSN 0305-0548
Đurić, M., & Devedžić, V. (2002). I-Promise—intelligent Protective Material Selection.
Expert
Systems with Applications
, Vol.23, pp. 219-227, ISSN 0957-4174
Edwards, K.L., & Deng, Y.-M. (2007). Supporting Design Decision-making when Applying
Materials in Combination.
Materials & Design
, Vol.28, pp. 1288-1297, ISSN 0261-3069
Elsevier ed. (2010). Design Engineering Manual, Elsevier, ISBN 978-1-85617-838-9
Huang, G.Q. (Ed). (1996).
Design for X - Concurrent Engineering Imperatives
. Chapman & Hall,
ISBN 0-4127-8750-4
Kim, I.S., Prasad, Y.K.D.V., & Stoynov, L.A. (2004). A study on an Intelligent System to
Predict the Tensile Stress in Welding Using Solar Energy Concentration.
Journal of
Materials Processing Technology
, Vol.153-154, pp. 649-653, ISSN 0924-0136
Kuo, T.-C., Huang, S.H., & Zhang, H.-C. (2001). Design for Manufacture and Design for 'X':
Concepts, Applications and Perspectives.
Computers & Industrial Engineering
,
Vol.41, pp. 241-260, ISSN 0360-8352
Kumar, S., & Singh, R. (2007). A Short Note on an Intelligent System for Selection of
Materials for Progressive Die Components.
Journal of Materials Processing
Technology
, Vol.182, pp. 456-461, ISSN 0924-0136
McMahon, C., Lowe, A., & Culley, S. (2004). Knowledge Management in Engineering
Design: Personalization and Codification.
Journal of Engineering Design
, Vol.15, No.
4, pp. 307-325, ISSN 0954-4828
Molcho, G., Zipori, Y., Schneor, R., Rosen, O., Goldstein, D., & Shpitalni, M. (2008).
Computer Aided Manufacturability Analysis: Closing the Knowledge Gap between
the Designer and the Manufacturer.
CIRP Annals - Manufacturing Technology
, Vol.57,
pp. 153-158, ISSN 0007-8506
Novak, M., & Dolšak, B. (2008). Intelligent FEA-based Design Improvement.
Engineering
Applications of Artificial Intelligence
, Vol.21, pp. 1239-1254, ISSN 0952-1976
Search WWH ::
Custom Search