Environmental Engineering Reference
In-Depth Information
Federal Highway Administration (FHWA) (2004) National bridge inspection standards
Fisher JW, Kaufmann EJ, Wright W, Xi Z, Tjiang H, Sivakumar B, Edberg W (2001) In: Hoan
bridge
forensic
investigation
failure
analysis
final
report.
Wisconsin
Department
of
Transportation and the Federal Highway Administration, Madison, WI
Gandomi AH, Yun GJ, Yang X-S, Talatahari S (2013) Chaos-enhanced accelerated particle
swarm optimization. Commun Nonlinear Sci Numer Simul 18:327-340
Hartle RA, Amrhein WJ, Iii KEW, Baughman DR, Tkacs JJ (1990) Bridge inspector's training
manual/90. Federal Highway Administration, McLean
Holder DS (2005) Electrical impedance tomography—methods, history and applications. Institute
of Physics Publishing, Bristol, UK
Horsley DA, Talin AA, Skinner JL (2008) Micromechanical and microfluidic devices
incorporating metallic gratings fabricated using nanoimprint lithography. J Nanophotonics
2:021785/1-11
Hou T.-C, Loh KJ, Lynch JP (2007a) Electrical impedance tomography of carbon nanotube
composite materials. SPIE, San Diego, CA 652926/1-10
Hou TC, Loh KJ, Lynch JP (2007b) Spatial conductivity mapping of carbon nanotube composite
thin films by electrical impedance tomography for sensing applications. Nanotechnology
18:315501/1-9
Hunt J, Timmis J, Cooke E, Neal M, King C (1999) Jisys: the envelopment of an artificial
immune system for real world applications. In: Dasgupta D (ed) Artificial immune systems
and their applications. Springer, Berlin Heidelberg
Huston D, Esser B, Miller J, Wang X (2005) Robotic and mobile sensor systems for structural
health monitoring. In: 5th International workshop on structural health monitoring, Stanford,
CA, pp 1-8
Javadi AA, Farmani R, Tan TP (2005) A hybrid intelligent genetic algorithm. Adv Eng Inform
19:255-262
Kang I, Lee JW, Choi GR, Jung JY, Hwang S-H, Choi Y-S, Yoon KJ, Schulz MJ (2006)
Structural health monitoring based on electrical impedance of a carbon nanotube neuron. Key
Eng Mater 321-323:140-145
Kao
I,
Kumar
A,
Binder
J
(2007)
Smart
MEMS
flow
sensor:
theoretical
analysis
and
experimental characterization. IEEE Sens J 7:713-722
Kennedy J, Eberhart R (1995) Particle swarm optimization. In: Proceedings of IEEE international
conference on neural networks, Perth, Australia, pp 1942-1948
Kersey AD (1996) A review of recent developments in fiber optic sensor technology. Opt Fiber
Technol 2:291-317
Kim DR, Lee CH, Zheng X (2009) Probing flow velocity with silicon nanowire sensors. Nano
Lett 9:1984-1988
Kirikera GR, Shinde V, Schulz MJ, Ghoshal A, Sundaresan MJ, Allemang RJ, Jong WL (2008) A
structural neural system for real-time health monitoring of composite materials. Struct Health
Monit 7:65-83
Kostopoulos V, Vavouliotis A, Karapappas P, Tsotra P, Paipetis A (2009) Damage monitoring of
carbon fiber reinforced laminates using resistance measurements. improving sensitivity using
carbon nanotube doped epoxy matrix system. J Intell Mater Syst Struct 20:1025-1034
Lee MH, Nicholls HR (1999) Review article tactile sensing for mechatronics—a state of the art
survey. Mechatronics 9:1-31
Li Z, Dharap P, Nagarajaiah S, Barrera EV, Kim JD (2004) Carbon nanotube film sensors. Adv
Mater 16:640-643
Lin T-K, Kiremidjian A, Lei C-Y (2010) A bio-inspired structural health monitoring system
based on ambient vibration. Smart Mater Struct 19:115012
Lin Y, Sodano HA (2009) Fabrication and electromechanical characterization of a piezoelectric
structural fiber for multifunctional composites. Adv Funct Mater 19:592-598
Liu C (2007) Micromachined biomimetic artificial haircell sensors. Bioinspiration Biomimetics
2:S162-S169
Search WWH ::
Custom Search