Processing of bioresorbable and other polymers for medical applications - Durability and Reliability of Medical Polymers - page 73

3.12 References
Chung, S. W., Ingle, N. P., Montero, G. A., Kim, S. H. & King, M. W. 2010. Bioresorbable
elastomeric vascular tissue engineering scaffolds via melt spinning and electrospinning.
Acta Biomaterialia , 6 , 1958-1967.
Freiberg, S. & Zhu, X. 2004. Polymer microspheres for controlled drug release. International
Journal of Pharmaceutics , 282 , 1-18.
Han, C. D. 2007. Rheology and processing of polymeric materials , Oxford; new York,
Oxford University Press.
Harris, A. M. & Lee, E. C. 2008. Improving mechanical performance of injection
molded Pla by controlling crystallinity. Journal of Applied Polymer Science , 107 ,
2246-2255.
Jiang, L., Morelius, E., Zhang, J. W., Wolcott, M. & Holbery, J. 2008. Study of the
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/cellulose nanowhisker composites
prepared by solution casting and melt processing. Journal of Composite Materials ,
42 , 2629-2645.
Kramschuster, A. & Turng, L. S. 2010. An injection molding process for manufacturing
highly porous and interconnected biodegradable polymer matrices for use as tissue
engineering scaffolds. Journal of Biomedical Materials Research Part B-Applied
Biomaterials , 92B , 366-376.
Nishimura, Y., Takasu, A., Inai, Y. & Hirabayashi, T. 2005. Melt spinning of poly( l -lactic
acid) and its biodegradability. Journal of Applied Polymer Science , 97 , 2118-2124.
Osswald, T. A. & Hernández-Ortiz, J. P. 2006. Polymer processing: modeling and
simulation , Munich; Cincinnati, Hanser Publishers.
Perale, G., Pertici, G., Giordano, C., Daniele, F., Masi, M. & Maccagnan, S. 2008. Non-
degradative microextrusion of resorbable polyesters for pharmaceutical and biomedical
applications: The cases of poly-lactic-acid and poly-caprolactone. Journal of Applied
Polymer Science , 108 , 1591-1595.
Rhim, J. W., Mohanty, A. K., Singh, S. P. & Ng, P. K. W. 2006. Effect of the processing
methods on the performance of polylactide films: Thermocompression versus solvent
casting. Journal of Applied Polymer Science , 101 , 3736-3742.
Rothen-Weinhold, A., Besseghir, K., Vuaridel, E., Sublet, E., Oudry, N., Kubel, F. &
Gurny, R. 1999. Injection-molding versus extrusion as manufacturing technique for
the preparation of biodegradable implants. European Journal of Pharmaceutics and
Biopharmaceutics , 48 , 113-121.
Salerno, A., Iannace, S. & Netti, P. A. 2008. Open-pore biodegradable foams prepared
via gas foaming and microparticulate templating. Macromolecular Bioscience , 8 ,
655-664.
Siemann, U. 2005. Solvent casting technology - the most suitable tool for LCD polarizer
film production. Proceedings of the Twenty-Fifth International Display Research
Conference - Eurodisplay 2005 , 240-242.
Tadmor, Z. & Gogos, C. G. 2006. Principles of polymer processing , Hoboken, n.J.,
Wiley-Interscience.
Taubner, V. & Shishoo, R. 2001. Influence of processing parameters on the degradation
of poly( l -lactide) during extrusion. Journal of Applied Polymer Science , 79 , 2128-
2135.
Wang, Y. M., Steinhoff, B., Brinkmann, C. & Alig, I. 2008. In-line monitoring of the
thermal degradation of poly( l -lactic acid) during melt extrusion by UV-vis spectroscopy.
Polymer , 49 , 1257-1265.

￿ ￿ ￿ ￿ ￿ ￿