Environmental Engineering Reference
In-Depth Information
7. Hanselmann H (1996) Hardware-in-the-loop simulation testing and its integration into a
cacsd toolset. In: Computer-aided control system design, 1996., proceedings of the 1996
IEEE international symposium on, IEEE, pp 152-156
8. Jonkman J (2013) NWTC computer-aided engineering tools (FAST). url:
http://wind.nrel.
9. Jonkman JM, Butterfield S, Musial W, Scott G (2009) Definition of a 5-MW reference wind
turbine for offshore system development. Technical report, National Renewable Energy
Laboratory, Golden, Colorado, nREL/TP-500-38060
10. Kelley N, Jonkman B (2013) NWTC computer-aided engineering tools (Turbsim). url:
http://
11. Khezami N, Braiek NB, Guillaud X (2010) Wind turbine power tracking using an improved
multimodel quadratic approach. ISA Trans 49(3):326-334. Doi:
10.1016/j.isatra.2010.03.008
,
12. Maclay D (1997) Simulation gets into the loop. IEEE Rev 43(3):109-112
13. Manjock A (2005) Evaluation Report: Design codes FAST and ADAMS for load calculations
of onshore wind turbines, Germanischer Lloyd WindEnergie, Report no. 72042
14. Terwiesch P, Keller T, Scheiben E (1999) Rail vehicle control system integration testing
using
digital
hardware-in-the-loop
simulation.
IEEE
Trans
Control
Syst
Technol
7(3):352-362
15. Vidal Y, Acho L, Luo N, Zapateiro M, Pozo F (2012) Power control design for variable-
speed wind turbines. Energies 5(8):3033-3050. doi:
10.3390/en5083033
16. Vincent TL, Grantham WJ (1999) Nonlinear and optimal control systems. John Wiley &
Sons, Inc., New York
17. Zhang Q, Reid J, Wu D et al (2000) Hardware-in-the-loop simulator of an off-road vehicle
electrohydraulic steering system. Trans ASAE 43(6):1323-1330