Environmental Engineering Reference
In-Depth Information
References
1. Ackermann T (2005) Wind power in power systems. Wiley, New York
2. Lampola P, Perho J, Saari J (1995) Electromagnetic and thermal design of a low speed
permanent magnet wind generator. In: Proceeding of the international symposium on electric
power engineering, 211-216
3. Grauers A (1996) Design of direct-driven permanent magnet generators for wind turbines.
Technical Report 292, Chalmers University of Technology, Goteborg
4. Akhmatov V (2003) Variable-speed wind turbines with multi-pole synchronous permanent
magnet generators. Part 1. modeling in dynamic simulation tools. J Wind Eng 27:531-548
5. Gonzales-Longatt FM (2005) Dynamic model of variable speed WECS: attend of
simplification. In: Proceeding of the 5th international workshop on large-scale integration
of wind power and transmission networks for offshore wind farms
6. Hansen LH, Helle L, Blaabjerg F, Ritchie E, Munk-Nielsen S, Binder H, Sørensen P, Bak-
Jensen B (2001) In: Conceptual survey of generators and power electronics for wind turbines.
Risø National Laboratory, Denmark
7. Cavagnino A, Lazzari M, Profumo F, Tenconi A (2000) A comparison between the axial and
the radial flux structures for PM synchronous motors. IEEE Ind Appl Conf Proc 3:1611-1618
8. Spooner E, Williamson AC (1996) Direct coupled, permanent magnet generators for wind
turbine applications. IEEE Electric Power Appl Proc 143:1-8
9. Doherty R, Denny E, O'Malley M (2004) System operation with a significant wind power
penetration. IEEE Power Eng Summer Meeting Proc 1:1002-1007
10. Salman SK, Teo ALJ (2003) Windmill modeling consideration and factors influencing the
stability of a grid-connected wind power-based embedded generator. IEEE Trans Power Syst
Proc 18:793-802
11. Litipu Z, Nagasaka K (2004) Improve the reliability and environment of power system based
on optimal allocation of WPG. IEEE Power Syst Conf Exposition Proc 1:913-918
12. Dizdarevic N, Dizdarevic N, Majstrovic M, Zutobradic S (2004) Power quality in a
distribution network after wind power plant connection. IEEE Power Syst Conf Exposition
Proc 2:913-918
13. ON Netz E (2005) Wind power report.
http://www.nowhinashwindfarm.co.uk/EON_Netz_
Windreport_e_eng.pdf
.
Accessed 22 Apr 2005
14. Protter N, Garnett G, Pai S (2004) BC Wind Integration System Expansion Study. Elsam Eng
1:1002-1007
15. Gjengedal T (2004) Large scale wind power farms as power plants. In: Proceeding of the
nordic wind power conference
16. Matevosyan J, Ackermann T, Bolik SM (2005) Technical regulations for the interconnection
of wind farms to the power system. Wind Power Power Syst Proc 25(3):115-142
17. Ko HS (2006) Supervisory voltage control scheme for grid-connected wind farms, PhD
Dissertation, Department of Electrical and Computer Engineering at the University of British
Columbia, Vancouver, BC, Canada
18. Ong CH (1998) Dynamic simulation of electric machinery. Prentice Hall, New Jersey
19. Morren J, de Haan SWH, Bauer P, Pierik JTG (2003) Comparison of complete and reduced
models of a wind turbine using doubly-fed induction generator. In: Proceedings of the 10th
European conference on power electronics and applications
20. Krause PC, Wasynczuk O, Sudhoff SD (2002) Analysis of electric machinery and drive
systems. Wiley, New York
21. Astrom K, Hagglung T (2004) PID Controllers. Lund Institute of Technology, Sweden
22. Ko HS, Bruey S, Dumont G, Jatskevich J, Ali A (2007) A PI control of DFIG-based wind
farm for voltage regulation at remote location. IEEE Power Eng Soc Gen Meet Proc 1-6:35
23. MATLAB
and Simulink
, MathWorks, January 2000
