Environmental Engineering Reference
In-Depth Information
6. Ribrant J, Bertling L (2007) Survey of failures in wind power systems with focus on Swedish
wind power plants during 1997-2005. In: Proceedings of the 2007 IEEE power engineering
society general meeting, Tampa, USA
7. Blanke M, Kinnaert M, Lunze J, Staroswiecki M (2006) Diagnosis and fault-tolerant control,
Second edn. Springer, Berlin
8. Basseville M, Nikiforov I (1993) Detection of abrupt changes: theory and application.
Prentice-Hall, Englewood Cliffs
9. Nikiforov I (1995)
A generalized
change
detection
problem. IEEE
Trans Inf Theory
41:171-187
10. Nikiforov I (1998) A simple recursive algorithm for diagnosis of abrupt changes in signals
and systems. In: Proceedings of the 1998 American control conference, Philadelphia, USA,
vol 3, pp 1938-1942
11. Kinnaert M, Vrancic D, Denolin E, Juricic J, Petrovcic J (2000) Model-based fault detection
and isolation for a gas-liquid separation unit. Control Eng Pract 8:1273-1283
12. Li Y, Gu F, Harris G, Ball A, Bennett N, Travis K (2005) The measurement of instantaneous
angular speed. Mech Syst Signal Process 19:786-805
13. NWTC Computer-Aided Engineering Tools (FAST by Jonkman J, PhD).
http://wind.nrel.
14. Boulkroune B, Galvez-Carrillo M, Kinnaert M (2013) Combined signal and model based
fault diagnosis for a doubly fed induction generator. IEEE Trans Control Syst Technol
21:1771-1783
15. Galvez M (2011) Sensor fault diagnosis for wind-driven doubly-fed induction generators.
PhD thesis, Université libre de Bruxelles (ULB)
16. Galvez-Carrillo M, Kinnaert M (2010) Sensor fault detection and isolation in three-phase
systems using a signal-based approach. IET Control Theory Appl 4:1838-1848
17. Patton R,
Frank
P,
Clark R
(1989)
Fault diagnosis
in dynamic
systems:
theory
and
applications. Prentic-Hall, Englewood Cliffs
18. Franklin G, Powell J, Workman M (1998) Digital control of dynamic systems, Third edn.
Addison-Wesley, Reading
19. Rodriguez P, Luna A, Ciabotaru M, Teodorescu R, Bjaabjerg F (2006) Advanced grid
synchronization system for power converters under unbalanced and distorted operating
conditions. In: Proceedings of the 32nd annual conference of the IEEE industrial electronic
society—IECON 2006, Orlando, USA, pp 5173-5178
20. Basseville M, Benveniste A (1983) Design and comparative study of some sequential jump
detection
algorithms
for
digital
signals.
IEEE
Trans
Acoust
Speech
Signal
Process
31:521-535
21. Krause P, Wasynczuck O, Sudhoff S (2002) Analysis of electric machinery and drive
systems, second edn. Wiley-IEEE Press, New York
22. Chung S (2000) A phase tracking system for three-phase utility interface inverters. IEEE
Trans Power Electron 15:431-438
23. Matevosyan J, Ackermann T, Bolik S (2005) Technical regulations for the interconnection of
wind farms to the power system. In: Ackermann T (ed) Wind power in power systems. Wiley,
Chichester, pp 115-142
24. Kullaa J (2010) Sensor validation using minimum mean square error estimation. Mech Syst
Signal Process 24:1444-1457
25. Chabir K, Sauter D, Al-Salami IM, Aubrun C (2012) On fault detection and isolation design
for networked control systems with bounded delay constraints. In: Proceedings of the 8th
IFAC
symposium
on
fault
detection,
supervision
and
safety
of
technical
processes
(SAFEROCESS), Mexico City, Mexico
26. Alriksson P, Rantzer A (2006) Distributed Kalman filter using weighted averaging. In:
Proceedings of the 17th international symposium on mathematical theory of networks and
systems, Kyoto, Japan
27. Cattivelli FS, Sayed AH (2010) Diffusion strategies for distributed Kalman filtering and
smoothing. IEEE Trans Autom Control 55(9):2069-2084
