Environmental Engineering Reference
In-Depth Information
25. Xia Y, Hao H, Zanardo G, Deeks A (2006) Long term vibration monitoring of an RC slab:
temperature and humidity effect. Eng Struct 28(3):441-452
26. Kim JT, Park JH, Lee BJ (2006) Vibration-based damage monitoring in model plate-girder
bridges under uncertain temperature conditions. Eng Struct 29(7):1354-1365
27. Liu C, DeWolf JT (2007) Effect of temperature on modal variability of a curved concrete
bridge under ambient loads. J Struct Eng 133(12):1742-1751
28. Deraemaeker A, Reynders E, Roeck GD et al (2008) Vibration-based structural health
monitoring using output-only measurements under changing environment. Mech Syst Sig
Process 22(1):34-56
29. Balmes E, Basseville M, Bourquin F et al (2008) Merging sensor data from multiple
temperature scenarios for vibration monitoring of civil structures. Struct Health Monit
7(2):129-142
30. Basseville M, Bourquin F, Mevel L (2010) Handling the temperature effect in vibration
monitoring: two subspace-based analytical approaches. J Eng Mech 136(3):367-378
31. Yoo HH, Shin SH (1998) Vibration analysis of rotating cantilever beams. J Sound Vib
212(5):807-828
32. Bucher I, Ewins DJ (2001) Modal analysis and testing of rotating structures. Philos Trans
Roy Soc London Ser A Math Phys Eng Sci 359(1778):61-96
33. Osgood RM (2001) Dynamic characterization testing of wind turbines. Technical Report,
National Renewable Energy Laboratory, NREL/TP-500-30070, 2001
34. Park JH, Park HY, Jeong SY (2010) Linear vibration analysis of rotating wind-turbine blade.
Curr Appl Phys 10(2, Supplement 1):332-334
35. Sohn H, Czarnecki JA, Farrar CR (2000) Structural health monitoring using statistical
process control. J Struct Eng 126(11):1356-1363
36. Sohn H, Farrar CR, Hunter NF (2001) Structural health monitoring using statistical pattern
recognition techniques. J Dyn Syst Meas Contr 123(4):706-711
37. Lei Y, Kiremidjian AS, Nair KK et al (2003) Statistical damage detection using time series
analysis on a structural health monitoring benchmark problem. In: Proceedings of the 9th
international conference on applications of statistics and probability in civil engineering. San
Francisco, CA, USA
38. Basseville M, Mevel L, Goursat M (2004) Statistical model-based damage detection and
localization: subspaced-based residuals and damage-to-noise sensitivity ratios. J Sound Vib
275(3-5):769-794
39. Kane TR, Ryan RR, Banerjee AK (1987) Dynamics of a cantilever beam attached to a
moving base. J Guid Control Dyn 10:139-151
40. Bakr EM, Shabana AA (1986) Geometrically nonlinear analysis of multibody system. Comp
Struct 23:739-751
41. Wallrapp O, Schwertassek R (1991) Representation of geometric stiffening in multibody
system simulation. Int J Numer Meth Eng 32:1833-1850
42. Mayo J, Dominguez J, Shabana AA (1995) Geometrically nonlinear formulation of beams in
flexible multibody dynamics. J Vibr Acoust 117(4):501-509
43. Park S, Lee J-J, Yun C-B, Inman DJ (2008) Electro-mechanical impedance-based wireless
structural health monitoring using PCA-Data compression and k-means clustering
algorithms. J Intell Mater Syst Struct 19(4):509-520
44. Han S, Feeny BF (2002) Enhanced proper orthogonal decomposition for the modal analysis
of homogeneous structures. J Vib Control 8(1):19-40
45. Mei C, Fan J (2006) Methods for data analysis. Higher Education Press, Beijng
46. Ma J, Niu Y, Chen H (2006) Blind signal processing. National Defense Industry Press,
Beijing
47. Bao X, Chen L (2011) Recent progress in Brillouin scattering based fiber sensors. Sensors
11(4):4152-4187
48. Horiguchi T, Tateda M (1989) Optical-fiber-attenuation investigation using stimulated
Brillouin scattering between a pulse and a continuous wave. Opt Lett 14:408-410
