Residual Stress Evaluation in Vitreous Enameled Steel Sheets by Digital Images Analysis of Microstructures - Visual Computing: Scientific Visualization and Imaging Systems - page 180

relationship between the local characteristics of the structure and the stresses. In
particular, the presence of bubbles in the coating seems to have a significant role
on the distribution of the local residual stress while the effect of the graded layer
between the coating and the substrate seems to be attenuated and this aspect will
be further investigated.

References

1. Andrews, A.I.: Porcelain Enamel. The Garrard Press, Champaign (1961)
2. Vargin, V.V.: Technology of Enamels. Maclaren and Sons, London (1967)
3. Chelli, A., Poletti, R., Pignatti, L., Bruscoli, F., et al.: Composite enameled steel elements for
air preheaters and gas-gas heaters: an integrated approach from sheet forming and enamelling
to basket assembly. In: XXI International Congress on Porcelain Enamel, Shanghai,

pp. 130-158, 18-22 May 2008
4. Chelli, A., Poletti, R., Pignatti, L., et al.: Experimental study of the mechanical and
tribological properties of enameled steel plate, (abstract in english, full text in italian). Smalto
Porcellanato 3, 1-27 (2006)
5. Zucchelli, A., Minak, G., Ghelli, D.: Low-velocity impact behavior of vitreous-enameled
steel plates. Int. J. Impact Eng. 37, 673-684 (2010)
6. Zhang, X.C., Xu, B.S., Wang, H.D., et al.: An analytical model for predicting thermal
residual stresses in multilayer coating systems. Thin Solid Films 488, 274-282 (2005)
7. Bengtsson, P., Persson, C.: Modelled and measured residual stresses in plasma sprayed
thermal barrier coatings. Surf. Coat. Tech. 92, 78-86 (1997)
8. Swank, W.D., Gavalya, R.A., Wright, J.K., Wright, R.N.: Residual stress determination from
a laser-based curvature measurement. INEEL/CON-99-01176. http://www.osti.gov/bridge/
productbiblio.jsp?osti_id=758128 ( 2000) Accessed 11 May 2009
9. Lima, C.R.C., Nin, J., Guilemany, J.M.: Evaluation of residual stresses of thermal barrier
coatings with HVOF thermally sprayed bond coats using the Modified Layer Removal
Method (MLRM). Surf. Coat. Tech. 200, 5963-5972 (2006)
10. Wejrzanowski, T., Spychalsky, W.L., Rozniatowsky, K., et al.: Image based analysis of
complex microstructures of engineering materials. Int. J. Appl. Math. Comput. Sci. 18, 33-39
(2008)
11. Von Bradke, M., Gitzhofer, F., Henne, R.: Porosity determination of ceramic materials by
digital image analysis-a critical evaluation. Scanning 27, 132-135 (2005)
12. Ghafouri-Azar, R., Mostaghimi, J., Chandra, S.: Modeling development of residual stresses in
thermal spray coatings. Comput. Mater. Sci. 35, 13-26 (2006)
13. Wang, Z., Kulkarni, A., Deshpande, S., et al.: Effect of pores and interfaces on effective
properties of plasma sprayed zirconia coatings. Acta Mater. 51, 5319-5334 (2003)
14. Russ, J.C.: The image processing handbook. CRC Press, Boca Raton (1995)
15. Abramoff, M.D., Magelhaes, P.J., Ram, S.J.: Image Processing with Image. J. Biophotonics
Int. 11, 36-42 (2004)
16. Hsueh, C.H., Lee, C.S.: Modeling of elastic thermal stresses in two materials joined by a
graded layer. Compos. Part B-Eng. 34, 747-752 (2003)
17. Ravichandran, K.S.: Thermal residual stress in a functionally graded material system. Mater.
Sci. Eng. A-Struct. 201(269), 276 (1995)