Information Technology Reference
In-Depth Information
FIGURE 2-26
Specify devices
When adding devices manually, provide the following information as shown in Figure
2-27:
■
IPv4 address or FQDN of the device.
■
Access mode. This can be ICMP, SNMP, or ICMP and SNMP. If you choose ICMP and
SNMP, the device must be accessible using both protocols.
■
Port number. The default is UDP port 161, but if you are using another port for
SNMP you can change this.
■
SNMP version. This allows you to specify whether to use SNMP v1 or v2, or SNMP
v3. If using SNMP v1 or v2, specify the Run As account that contains the community
string.
7.
