Biomedical Engineering Reference
In-Depth Information
the sensory systems based on the signals from the corresponding artificial sensors.
For example, lux and decibel are the units to quantify lights and the sounds, re-
spectively . Furthermore, such standard signals can be sent over a long distance and
utilized to reproduce the corresponding stimuli. For example, one can take a picture
using a camera comprised of photosensors, send it through the internet, and repro-
duce it on display devices, which is one of the key technology in the modern IT and
entertainment devices such as smart phones and televisions. Thus, one of the key
events which triggered modern IT and entertainment industries can be the develop-
ment of artificial sensory devices for human eyes, ears and touch senses.
We can envision the development of bioelectronic noses and tongues may trig-
ger the similar progresses in the future. The signals from the bioelectronic noses
and tongues can be utilized to quantify the stimuli for human noses and tongues ,
respectively. For example, the standard signals from perfumes or foods (i.e. wine,
coffee etc) measured by bioelectronic noses or tongues can be sent over a long dis-
tance and used to evaluate the smells or tastes of them, respectively. Eventually, we
may be able to develop advanced devices to reproduce such smells or tastes from
the standard signals, which may open up the new era of modern entertainment and
IT industries. In this sense, we may say that the development of bioelectronic noses
is a major breakthrough in modern technology and we are at the dawn of a new
technological revolution.
References
1. Reich S, Thomsen C, Maultzsch J (2004) Carbon nanotubes: basic concepts and physical
properties. Wiley-VCH Weinheim, Cambridge
2. Deheer WA, Chatelain A, Ugarte D (1995) A carbon nanotube field-emission electron source.
Science 270(5239):1179-1180
3. Postma HWC, Teepen T, Yao Z, Grifoni M, Dekker C (2001) Carbon nanotube single-elec-
tron transistors at room temperature. Science 293(5527):76-79
4. Kim JR, So HM, Kim JJ, Kim J (2002) Spin-dependent transport properties in a single-walled
carbon nanotube with mesoscopic Co contacts. Phys Rev B 66(23):233-401
5. Lee M, Im J, Lee BY, Myung S, Kang J, Huang L, Kwon YK, Hong S (2006) Linker-free di-
rected assembly of high-performance integrated devices based on nanotubes and nanowires.
Nat Nanotechnol 1(1):66-71
6. Dai HJ, Hafner JH, Rinzler AG, Colbert DT, Smalley RE (1996) Nanotubes as nanoprobes in
scanning probe microscopy. Nature 384(6605):147-150
7. Tans SJ, Devoret MH, Dai HJ, Thess A, Smalley RE, Geerligs LJ, Dekker C (1997) Indi-
vidual single-wall carbon nanotubes as quantum wires. Nature 386(6624):474-477
8. Bachtold A, Hadley P, Nakanishi T, Dekker C (2001) Logic circuits with carbon nanotube
transistors. Science 294(5545):1317-1320
9. Yu WJ, Chae SH, Lee SY, Duong DL, Lee YH (2011) Ultra-transparent, flexible single-
walled carbon nanotube non-volatile memory device with an oxygen-decorated graphene
electrode. Adv Mater 23(16):1889-1893
10.
Lee NS, Chung DS, Han IT, Kang JH, Choi YS, Kim HY, Park SH, Jin YW, Yi WK, Yun MJ,
Jung JE, Lee CJ, You JH, Jo SH, Lee CG, Kim JM (2001) Application of carbon nanotubes
to field emission displays. Diam Relat Mater 10(2):265-270
Search WWH ::




Custom Search