Graphics Programs Reference
In-Depth Information
Figure 2-46
Copies of Extrude.4 aligned with top part of the guitar
Figure 2-47
The Rectangle aligned
28. Press and hold the left mouse button on the
Subdivision Surface
tool; a flyout is dis-
played. Choose
Extrude
from it;
Extrude.11
is added to the Object Manager. Next, se-
lect
Rectangle
.
29. Press and hold the left mouse button and drag
Rectangle
on
Extrude.11
and release the
left mouse button;
Rectangle
is connected to
Extrude.11
in the Object Manager.
30. Make sure
Extrude.11
is selected in the Object Manager and
Object
button is chosen
in the Attribute Manager. Next, enter
2
in the Z spinner corresponding to the
Movement
parameter. Figure 2-48 shows the extruded rectangle in the Perspective viewport.
31. Move the axis to the center of
Extrude.11
using the
Enable Axis
tool, as discussed
earlier.
32. Create twenty copies of
Extrude.11
and then place them, as shown in Figure 2-49. Use
the
Scale
tool to adjust the size of the copies.
Search WWH ::
Custom Search