Graphics Programs Reference
In-Depth Information
Figure 4-21 The strokes added
9. Press and hold the left mouse button and smoothen the surface of Cone , refer to Figure
4-22.
Next, you will draw a pattern on Cone .
10. Choose the Inflate tool from the Sculpting menu. In the Attributes tab, set the follow-
ing parameters in the Settings area:
Size: 11 Pressure: 48
11. In the Attributes tab, make sure that the Link Symmetry check box is selected. Also,
choose the Symmetry button; the Symmetry area is displayed. In this area, make sure
that the X (YZ) and Z (XY) check boxes are selected. Next, enter 3 and 0 in the Num-
ber of Radial Strokes and Radial Gap Angle spinners, respectively.
12. Press and hold the left mouse button and add strokes on Cone in the Perspective view-
port to create a pattern, refer to Figure 4-23.
13. Choose the Settings button; the Settings area is displayed. In this area, enter 90 in the
Pressure spinner. Press and hold the left mouse button and add strokes to create a pat-
tern on Cone , refer to Figure 4-24.
Search WWH ::




Custom Search