Graphics Programs Reference
In-Depth Information
Size: 10 Pressure: 9.4
4. Select the Link Symmetry check box and then select the Steady Stroke check box; the
Length spinner is activated.
The Link Symmetry check box is used to link the sculpting in such a way that when it is
done on one side of the object, the other side of the object is automatically sculpted.
5. In the Attributes tab, choose the Symmetry button; the Symmetry area is displayed. In
this area, select the Z (XY) check box. Next, select the Radial check box; the radial set-
tings below the Radial check box are activated. Select the ZX radio button correspond-
ing to the Radial Symmetry Mode parameter and then enter 5 and 3 in the Number of
Radial Strokes and Radial Gap Angle spinners, respectively.
The Z (XY) check box is used to determine the axis on which the object mirror plane will
be placed. The Radial check box is used to draw the radial strokes on the object.
6. Using the Pull tool, press and hold the left mouse button and apply strokes to the top of
the Cone in the Perspective viewport, refer to Figure 4-20.
7. Press and hold the left mouse button and apply strokes on Cone , refer to Figure 4-21.
8. Choose the Smooth tool from the Sculpting menu. In the Attributes tab, choose the
Settings button. Next, set the value of Size and Pressure to 2.5 and 4 , respectively, in
the Settings area. Make sure the Link Symmetry check box is selected.
Search WWH ::




Custom Search