Information Technology Reference
In-Depth Information
TABLE 4-4
Network policy settings
Setting
Description
RADIUS Attributes
Standard
Specifies the RADIUS standard attributes to send to clients. If an attribute isn't
configured, it isn't set to the client.
RADIUS Attributes
Vendor Specific
Specifies vendor-specific attributes to send to clients. If an attribute isn't
configured, it isn't set to the client.
NAP Enforcement
Choose from one of three modes:
Allow Full Network Access
When selected, allows unrestricted network
access. Use for reporting mode only.
Allow Full Network Access For A Limited Time
Allows full network access
until the specified time. After the specified date and time, the health policy is
enforced.
Allow Limited Access
Noncompliant computers are allowed access only to
the remediation network.
Remediation Server Group And Troubleshooting URL
When limited time
or limited access is selected previously, you can configure the location of the
remediation.
Enable Auto-remediation of Client Computers
When selected, computers that
don't meet the health policy are automatically remediated
NAP Extended State Specifies the extended state required to match the policy. Choices are Blank,
Transitional, Infected, and Unknown.
Multilink and
Bandwidth
Allocation Protocol
(BAP)
Multilink
:
Select one of three modes:
■
Server Settings Determine Multilink Usage
■
Do Not Allow Multilink Connections
■
Specify Multilink Settings allows you to configure the maximum number of
ports a client computer can use.
Bandwidth Allocation Protocol
Specifies the percentage of capacity that must
be reached for the specified time to reduce a multilink connection by one line.
Require BAP For Dynamic Multilink Requests
When selected, only BAP-
enabled clients are allowed to use dynamic Multilink requests.
IP filters
Specifies IP filters to apply to the interface. (See the following “IP filters” section for
details.)
Encryption
Choose accepted encryption settings:
■
Basic Encryption (MPPE 40-bit)
■
Strong Encryption (MPPE 56-bit)
■
Strongest Encryption (MPPE 128-bit)
■
No Encryption (not recommended)
IP Settings
Specifies the IP address assignment rules for this policy:
■
Server must supply an IP address.
■
Client may request an IP address.
■
Server settings determine IP address assignment.
■
Assign a static IPv4 address.
