Hardware Reference
In-Depth Information
according to the circuit diagram ( Figure 7-8 ). Load the NeoPixel
test code to be sure the ring is connected and functioning prop-
erly.
Figure 7-8. Wires on the ring of the FLORA NeoGeo Watch
It turns out the wires around the outside of the circuit aren't
super durable (they catch on clothing), so if we were you (or if
we had this project to do over again), we'd solder the NeoPixel
ring's wires to the inside of the ring before gluing the ring to
FLORA.
The circuit is finished! Now let's make it a watch.
Assemble the Watch
The watch circuit is held in place by the small strap on a leather
watch cuff ( Figure 7-9 ). The USB port and JST port line up per-
pendicularly to the band for easy access, and the tactile switch
is on the “top” side of the watch. This points FLORA's onboard
power switch toward you while you're wearing the watch.
Search WWH ::




Custom Search