Hardware Reference
In-Depth Information
your FLORA, but you can connect other I2C sensors/outputs by
using the set of SCL/SDA pins on the opposite side.
Dimensions : 14mm/.6 diameter x 3mm/.08 thick
FLORA Color Sensor
Your projects can see in color! This board is based around the
TCS34725, which has RGB and clear light sensing elements.
This board (see Figure 3-12 ) has an infrared blocking filter,
which means you'll get much truer color than with most sen-
sors, since humans don't see IR. The color sensor is great for
making a scarf with LEDs that change color to match the rest of
your outfit, for example.
Figure 3-12. FLORA color sensor
To make sure you get consistent color, the color sensor has a
neutral white LED to illuminate what you're trying to sense and
give a consistent reading in diverse lighting conditions. The LED
can be easily turned on during sensing and turned off afterward
to save power.
Dimensions : 15.25 mm/0.6 diameter × 2.16 mm/0.08 thick
FLORA GPS (Location Sensor)
This module is the best way to add a GPS to your wearable
project. Installed on the PCB is a small, super-thin, low-power
Search WWH ::




Custom Search