Environmental Engineering Reference
In-Depth Information
are the width and length of the transistors, respectively, and are
the biasing voltage and the threshold voltage, respectively. The AC cir-
cuit of the amplifier is shown in Fig.7.7 where only intrinsic capacitances
are considered. The output current is computed using both sampled-
data simulation and LSS-PC. The results are shown in Fig.7.8 with and
without the gate-to-source capacitance and gate-to-drain capacitance
considered. It is seen that when the capacitance is not considered, the
amplifier realizes When the capacitance is considered, the
output current is reduced. The results from sampled-data simulation
are in a good agreement with those from LSS-PC analysis.
The second example of time-invariant nonlinear circuit is shown in
Fig.7.9 with the value of the circuit parameters given in Table 7.9. The
nonlinear conductor is characterized by
Search WWH ::




Custom Search