Biomedical Engineering Reference
In-Depth Information
54. K.S. Nalwa and A. Garg, Phase evolution, magnetic and electrical properties
in Sm-doped bismuth ferrite,
J. Appl. Phys.
, Vol. 103, pp. 044101-1-6, 2008.
55. D.H. Wang, W.C. Goh, M. Ning, and C.K. Ong, Ef ect of Ba doping on mag-
netic, ferroelectric, and magnetoelectric properties in mutiferroic BiFeO
3
at
room temperature,
Appl. Phys. Lett.
, Vol. 88, pp. 212907-1-3, 2006.
56. S.K. Singh, K. Maruyama, and H. Ishiwara, Reduced leakage current in La
and Ni codoped BiFeO
3
thin i lms, Appl. Phys. Lett., Vol. 91, pp. 112913-1-3,
2007.
57. V.V.S.S. Sai Sunder, H. Halliyal, and A.M. Umarji, Investigation of tetragonal
distortion in the PbTiO
3
-BiFeO
3
system by high-temperature X-ray dif rac-
tion,
J. Mater. Res.
, Vol. 10, pp. 1301-1306, 1995.
58. R. Gerson, P.C. Chou, and W.J. James, Ferroelectric properties of PbZrO
3
-
BiFeO
3
solid solutions,
J. Appl. Phys.
, Vol. 38, pp. 55-60, 1967.
59. R.T. Smith, G.D. Achenbach, R. Gerson, and W.J. James, Dielectric proper-
ties of solid solutions of BiFeO
3
with Pb(Ti, Zr)O
3
at high temperature and
high frequency,
J. Appl. Phys.
, Vol. 39, pp. 70-74, 1968.
60. T. Kimura, S. Kawamoto, I. Yamada, M. Azuma, M. Takano, and Y. Tokura,
Magnetocapacitance ef ect in multiferroic BiMnO
3
,
Phys. Rev. B
, Vol. 67, pp.
180401(R)-180404(R), 2003.
61. G. Catalan, Magnetocapacitance without magnetoelectric coupling,
Appl.
Phys. Lett.
, Vol. 88, pp. 102902-1-3, 2006.
62. D.L. Segal,
Chemical Synthesis of Advanced Ceramic Materials
, Cambridge
University Press, Cambridge, 1989.
63. J.H. Xu, H. Ke, D.C. Jia, W. Wang, and Y. Zhou, Low-temperature synthesis
of BiFeO
3
nanopowders via a sol-gel method,
J. Alloy. Compd.
, Vol. 472, Iss.
1-2, pp. 473-477, 2009.
64. J.K. Kim, S.S. Kim, and W.J. Kim, Sol-gel synthesis and properties of mul-
tiferroic BiFeO
3
,
Materials Letters
, Vol. 59, Iss. 29-30, pp. 4006-4009, 2005.
65. S.M. Selbach, M.A. Einarsrud, T. Tybell, and T. Grande, Synthesis of BiFeO
3
by
wet chemical methods,
J. Am. Ceram. Soc.
, Vol. 90, Iss. 11, pp. 3430-3434, 2007.
66. V. Fruth, E. Tenea, M. Gartner, M. Anastasescu, D. Berger, R. Ramer, and M.
Zaharescu, Preparation of BiFeO
3
i lms by wet chemical method and their
characterization,
J. European Ceramic Society
, Vol. 27, Iss. 2-3, pp. 937-940,
2007.
67. J.F. Crider, Self-propagating high temperature synthesis: A Soviet method
for producing ceramic materials,
Ceram. Eng. Sci. Proc.
, Vol. 3, No. 9-10, pp.
519-28, 1982.
68. Z.A. Munir, Synthesis of high temperature materials by self -propagating
combustion methods,
Am. Ceram. Soc. Bull.
, Vol. 67, pp. 342-349, 1988.
69. B.K. Agrawal, Synthesis of multiferroic BiFeO
3
material by autocombustion
technique, h esis by Department of Ceramic Engineering, National Institute
of Technology, Rourkela, 2009.
70. M.A. Janney and O.O. Omatete, Method for molding ceramic powders using
a water-based gel casting processing; U.S. Patent No. 5 028 362, 1991.
