Nanoparticle Exposures in Occupational Environments - Biointeractions of Nanomaterials - page 71

Oberdörster, G. 2000. Toxicology of ultrafine particles: In vivo studies. Philos. Trans. R. Soc. Lond. A .
358:2719-2740.
Oberdörster, G. 2001. Pulmonary effects of inhaled ultrafine particles. Int. Arch. Occup. Environ. Health 74: 1-8.
Oberdörster, G., Oberdörster, E., Oberdörster, J. 2005. Nanotoxicology: An emerging discipline evolving from
studies of ultrafine particles. Environ. Health Perspect. 113:823-839.
OSHA (Occupational Safety and Health Administration). 2009a. Screening and Surveillance: A Guide to
OSHA Standards . Washington, DC: OSHA, Department of Labor. OSHA 3162-12R.
OSHA. 2009b. Assigned Protection Factors for the Revised Respiratory Protection Standard . Washington, DC:
OSHA, Department of Labor. OSHA 3352-02.
Ostiguy, C., Roberge, B., Ménard, L., Endo, C.-A. 2009. Best Practices Guide to Synthetic Nanoparticle Risk
Management . Montréal, Québec, Canada: IRSST. Report R-599.
Ostiguy, C., Roberge, B., Woods, C., Soucy, B. 2010. Engineered Nanoparticles: Current Knowledge about
Occupational Health and Safety Risks and Prevention Measures . Montréal, Québec, Canada: IRSST.
Report R-656.
Paik, S.Y., Zalk, D.M., Swuste, P. 2008. Application of a pilot control banding tool for risk level assessment and
control of nanoparticle exposures. Ann. Occup. Hyg. 52:419-428.
Park, J., Kwak, B.K., Bae, E., Lee, J., Kim, Y., Choi, K., Yi, J. 2009. Characterization of exposure to silver
nanoparticles in a manufacturing facility. J. Nanopart. Res. 11:1705-1712.
Park, J.Y., Ramachandran, G., Raynor, P.C., Olson, Jr., G.M. 2010. Determination of particle concentration
rankings by spatial mapping of particle surface area, number, and mass concentrations in a restaurant and
a die casting plant. J. Occup. Environ. Hyg. 7:466-476.
Peters, T., Elzey, S., Johnson, R., Park, H., Grassian, V., Maher, T., O'Shaughnessy, P. 2009. Airborne monitor-
ing to distinguish engineered nanomaterials from incidental particles for environmental health and safety.
J. Occup. Environ. Hyg . 6:73-81.
Pflücker, F., Wendel, V., Hohenberg, H., Gartner, E., Will, T., Pfeiffer, S., Wepf, R., Gers-Barlag, H. 2001. The
human stratum corneum layer: An effective barrier against dermal uptake of different forms of topically
applied micronised titanium dioxide. Skin Pharmacol. Appl. Skin Physiol . 14:92-97.
Plitzko, S. 2009. Workplace exposure to engineered nanoparticles. Inhal. Toxicol . 21:25-29.
Plog, B.A., Quinlan, P.J., Villarreal, J. 2012. Fundamentals of Industrial Hygiene , 6th ed., USA: National
Safety Council.
Ramachandran, G., Paulsen, D., Watts, W., Kittelson, D. 2005. Mass, surface area and number metrics in diesel
occupational exposure assessment. J. Environ. Monit . 728-735.
Riediker, M., Ostiguy, C., Triolet, J., Troisfontaine, P., Vernez, D., Bourdel, G., Thieriet, N., Cadène, A. 2012.
Development of a control banding tool for nanomaterials. J. Nanomaterials. 1:1-8.
Ryman-Rasmussen, J.P., Riviere, J.E., Monteiro-Riviere, N.A. 2006. Penetration of intact skin by quantum dots
with diverse physicochemical properties. Toxicol. Sci . 91:159-165.
Steinkrauss, M., Fierz, H., Lerena, P., Suter, G. 2010. Fire and Explosion Properties of Synthetic Nanomaterials .
Berne, Switzerland: Federal Office for the Environment (FOEN). Environmental studies no. 1011.
Stephenson, D., Seshadri, G., Veranth, J.M. 2003. Workplace exposure to submicron particle mass and number
concentrations from manual arc welding of carbon steel. AIHA J. 64:516-521.
Tinkle, S.S., Antonini, J.M., Rich, B.A., Roberts, J.R., Salmen, R., DePree, K., Adkins, E.J. 2003. Skin as a route
of exposure and sensitization in chronic beryllium disease. Environ. Health Perspect. 111:1202-1208.
Tran, C.L., Buchanan, D., Cullen, R.T., Searl, A., Jones, A.D., Donaldson, K. 2000. Inhalation of poorly soluble
particles. II. Influence of particle surface area on inflammation and clearance. Inhal. Toxicol . 12:1113-1126.
Tsai, C.J., Liu, C.N., Hung, S.M., Chen, S.C., Uang, S.N., Cheng, Y.S., Zhou, Y. 2012. Novel active personal
nanoparticle sampler for the exposure assessment of nanoparticles in workplaces. Environ. Sci. Technol .
46:4546-4552.
Tsai, S.J., Ada, E., Isaacs, J., Ellenbecker, M.J. 2009. Airborne nanoparticle exposures associated with the
manual handling of nanoaluminia and nanosilver in fume hoods. J. Nanopart. Res . 11:147-161.
Tsai, S.J., Huang, R.F., Ellenbecker, M.J. 2010. Airborne nanoparticle exposures while using constant-flow,
constant-velocity, and air-curtain-isolated fume hoods. Ann. Occup. Hyg . 54:78-87.
Van Duuren-Stuurman, B., Vink, S.R., Verbist, K.J.M., Heussen, H.G.A., Brouwer, D.H., Kroese, D.E.D.,
Tielemans, E., Fransman, W. 2012. Stoffenmanager nano version 1.0: A web-based tool for risk prioriti-
zation of airborne manufactured nano objects. Ann. Occup. Hyg . 56:525-541.
Wang, Y.F., Tsai, P.J., Chen, C.W., Chen, D.R., Hsu, D.J. 2010. Using a modified electrical aerosol detector
to predict nanoparticle exposure to different regions of the respiratory tract for workers in carbon black
manufacturing industry. Environ. Sci. Technol . 44:6767-6774.