Agriculture Reference
In-Depth Information
8 Attach the drum holder you made in Step 1, holes facing
up, to the front of the large board with the left side of the
drum holder aligned with the left side of the large board and
the rear edge of the drum holder 4-1/2-inch back from the
front edge of the large board. Use deck screws drilled in from
the bottom of the large board into the long boards of the drum
holder.
Completed plucker drum.
The large board with hinge and hook installed.
9 Slide the shafts on either end of the drum into the pillow
block bearings, mount the bearings to the drum holder using
Search WWH ::




Custom Search