Biomedical Engineering Reference
In-Depth Information
[15] Formaggia L., Gerbeau J., Nobile, F, Quarteroni A.: Numerical treatment of defective bound-
ary conditions for the navier-stokes equations. SIAM J. Numer. Anal.
40
: 376-401, 2002.
[16] Fried I.: Condition of finite element matrices generated from nonuniform meshes. AIAA Jour-
nal
10
: 219-221, 1972.
[17] Garimella R.V., Shephard M.S.: Boundary layer mesh generation for viscous flow simula-
tions. International Journal for Numerical Methods in Engineering
49
(1): 193-218 (2000)
[18] George P.L., Frey P.: Mesh Generation. Hermes, 2000.
[19] Geuzaine C., Remacle J.F.: Gmsh: a three-dimensional finite element mesh generator with
built-in pre- and post-processing facilities. International Journal for Numerical Methods in
Engineering
79
(11): 1309-1331, 2009.
[20] Giddens D., Zarins C., Glagov S.: The role of fluid mechanics in localisation and detection
of atherosclerosis. J Biomech Engng
115
: 588-594, 1993.
[21] Gobin Y., Counord J., Flaud P.: In vitro study of haemodynamics in a giant saccular aneurysm
model: influence of flow dynamics in the parent vessel and effects of coil embolisation. J.
Neuroradiology
36
: 530-536, 1994.
[22] Graves V.B., Strother C.M., Partington C.R., Rappe A.: Flow dynamics of lateral carotid
artery aneurysms and their effects on coils and balloons: an experimental study in dogs. AJNR
Am. J. Neuroradiol.
13
: 189-196, 1992.
[23] Ito Y., Nakahashi K.: Direct surface triangulation using stereolithography data. AIAA Journal
40
(3): 490-496, 2002.
[24] Kallinderis Y., Khawaja A., Mcmorris H.: Hybrid prismatic/tetrahedral grid generation for
complex geometries. AIAA Paper
34
: 93-0669, 1996.
[25] Krams R., Wentzel J., Oomen J., Vinke R., Schuurbiers J., de Feyter P., Serruys P., Slager C.:
Evaluation of endothelial shear stress and 3d geometry as factors determining the develop-
ment of atherosclerosis and remodeling in human coronary arteries in vivo. Arteriosclerosis,
Thrombosis, and Vascular Biology
17
: 2061-2065, 1997.
[26] Kunert G.: Anisotropic mesh construction and error estimation in the finite element method.
Numer. Methods Partial Differential Equations
18
: 625-648, 2000.
[27] Laug P., Boruchaki H.: Interpolating and meshing 3d surface grids. International Journal for
Numerical Methods in Engineering
58
: 209-225, 2003.
[28] Levy B., Petitjean S., Ray N., Maillot J.: Least squares conformal maps for automatic texture
atlas generation. In: Computer Graphics (Proceedings of SIGGRAPH 02), pp. 362-371, 2002.
[29] Marchandise E., Compere G., Willemet M., Bricteux G., Geuzaine C., Remacle J.F.: Qual-
ity meshing based on stl triangulations for biomedical simulations. International Journal for
Numerical Methods in Biomedical Engineering
83
: 876-889, 2010.
[30] Marchandise E., Carton de Wiart C., Vos W., Geuzaine C., Remacle J.F.: High quality surface
remeshing using harmonic maps. Part II: Surfaces with high genus and of large aspect ratio.
International Journal for Numerical Methods in Engineering, online 2011.
[31] Nicoud F., Schoenfeld T.: Integral boundary conditions for unsteady biomedical cfd applica-
tions. Int. J. Numer. Meth. Fluids
40
: 457-465, 2002.
[32] Noori N., Scherer R., Perktold K.: Blood flow in distal end-to-side anastomoses with ptfe and
a venous patch: results of an in vitro flow visualisation study. Eur. J. Vasc. Endo. Vasc. Surg.
18
: 191-200, 1999.
[33] Rebay S.: Efficient unstructured mesh generation by means of Delaunay triangulation and
bowyer-watson algorithm. Journal of Computational Physics
106
: 25-138, 1993.
[34] Remacle J.F., Geuzaine C., Compere G., Marchandise E.: High quality surface remeshing
using harmonic maps. International Journal for Numerical Methods in Engineering
83
: 403-
425, 2010.
[35] Remacle J.F., Lambrechts J., Seny B., Marchandise E.: Blossom-quad: a non-uniform quadri-
lateral mesh generator using a minimum cost perfect matching algorithm. International Jour-
nal for Numerical Methods in Engineering, submitted 2011.
[36] Sahni O., Jansen K., Shephard M.: Automated adaptive cardiovascular flow simulations. En-
gineering with Computers
25
(1): 25-36, 2009.
