Hardware Reference
In-Depth Information
[216] Yada, H. and Takeda, T. A coherent maximum likelihood head position
estimator for PERM disk drives, IEEE Transactions on Magnetics,Vol.
32, No. 3, Part 2, pp. 1867-1872, May 1996.
[217] Yang, Q. et al. Study on the in
fl
uence of friction in an automatic ball
balancing system, Journal of Sound and Vibration, Vol. 285, No. 1-2, pp.
73-99, July 2005.
[218] Yamaguchi, T. et al. Mode switching control design with initial value
compensation and its application to head positioning control on magnetic
disk drives, IEEE Transactions on Industrial Electronics, Vol. 43, No. 1,
pp. 65-73, February 1996.
[219] Yamaguchi, T., Numasato, H. and and Hirai, H. A mode-switching con-
trol for motion control and its application to disk drives: design of op-
timal mode-switching conditions, IEEE/ASME Transactions on Mecha-
tronics, Vol. 3, No. 3, pp. 202-209, September 1998.
[220] Yamaguchi, T. et al. Servo bandwidth and positioning accuracy design
for high track density disk drives, IEEE Transactions on Magnetics,Vol.
36, No. 5, pp. 2216-2218, September 2000.
[221] Yarmchuk, E. J. et al. Radial self-propagation pattern generation for disk
fi
le servo writing, U.S. Patent 5,907,447, 1999.
[222] Ye, H. et al. Radial error propagation issues in self servo track writing
technology, IEEETransactiononMagnetics, Vol. 38, No. 5, pp. 2180-
2182, September 2002.
[223] Yeack-Scranton, C.E. et al. An active slider for practical contact record-
ing, IEEE Transactions on Magnetics, Vol. 26, No. 5, pp. 2478-2483,
September 1990.
[224] Zhang, J.L. et al.Modi
fi
ed AFC runout cancellation and its in
fl
uence
on track following, Proceedings of the 23rd International Conference of
the IEEE Industrial Electronics Society, IECON'97, Vol. 1, No. 9-14, pp.
35-40, November 1997.
[225] Zhang, J.L. et al.Modi
fi
ed adaptive feedforward runout compensation
for dual stage servo system, IEEE Transactions on Magnetics, Vol. 36,
Vol. 5, Part 1, pp. 35813584, September 2000.
[226] Zhang, J.L. et al. 7nm PES 3 Sigma @ March 2005, Project Report,
Data Storage Institute, May 2005.
[227] Zhang, Q.D. et al. Design of high-speed magnetic
fl
uid bearing spindle
motor, IEEE Transactions on Magnetics, Vol. 37, No. 4, pp. 2647-2650,
July 2001.
