Hardware Reference
In-Depth Information
[100] Jahns, T.M., Becerra, R.C. and Ehsani, M. Integrated current regulation
for a brushless ECM drive, IEEE Transactions on Power Electronics,Vol.
6, No. 1, pp. 118-126, January 1991.
[101] Jang, J.S.R, Sun, C.T. and Mizutani, E. Neuro-fuzzy and Soft Comput-
ing, Prentice Hall, Reading, NJ, 1997.
[102] Jiang, Q., Bi, C. and Huang, R.Y. A new phase-delay free method to
detect back EMF zero-crossing points, Proceedings of the Asia Paci
fi
c
Magnetic Recording Conference APMRC'04, Seoul, Korea, August, 2004.
[103] Johansson, R. System Modeling & Identi
fi
cation,PrenticeHallInforma-
tion and System Sciences Series, editor - Kailath, T., 1992.
[104] Johnson, J.P., Ehsani, M. and Guzelgunler. Y. Review of sensorless meth-
ods for brushless DC, Conference Record of the 1999 IEEE IAS Annual
Meeting, Vol. 1, pp. 143 - 150, October 1999.
[105] Kalman, R.E. and Bertram, J.E. A uni
fi
ed approach to the theory of
sampling systems, Journal of Franklin Institute, Vol. 267, pp. 405-436,
May, 1959.
[106] Karaman, M. and Messner, W.C. Robust dual stage HDD track follow
control systems design for hand-off shaping, Digest of APMRC 2002,
CA5, 2002.
[107] Kempf, C. et al. Comparison of four discrete-time repetitive control algo-
rithms, Proceedings of the American Control Conference, pp. 2700-2704,
1992.
[108] Kenjo, T. and Sugawara, A. Stepping Motors and Their Microprocessor
Control, Oxford University Press, 2
nd
Edition, 1994.
[109] Kenjo, T. and Nagamori, S. Brushless Motors, Sogo Electronics Press,
2003.
[110] Kim, Y.H., OH, D.H. and Ho, S.L. PES reduction in magnetic disk
drives via a Low-TMR HGA and servo loop shaping, IEEE Transactions
on Magnetics, Vol. 41, No. 2, pp. 779-783, February 2005.
[111] Klaasen, E. et al. Silicon fusion bonding and deep reactive ion etching: a
new technology for microstructures, Sensors and Actuators: A, Vol. 52,
No. 1-3, pp. 132-139, 1996.
[112] Kobayashi, M. et al. Multi-sensing servo with carriage-acceleration feed-
back for magnetic disk drives, Proceedings of the American Control Con-
ference, 1998, Vol. 5, pp. 3038-3042, 1998.
