Hardware Reference
In-Depth Information
[88] Hu, X. et al. A TMR oriented optimization of suspension based milli-
actuators, Journal of Information Storage and Processing Systems,Vol.
2, No. 3, pp. 163-168, February 2000.
[89] Huang, Y. et al. Design and analysis of a high bandwidth disk drive servo
system using an instrumented suspension, IEEE/ASME Transactions on
Mechatronics, Vol. 4, No. 2, pp. 196-206, June 1999.
[90] Huang, F.Y. et al. Active damping in HDD actuator, IEEE Transactions
on Magnetics, Vol. 37, No. 2, Part: 1, pp. 847-849, March 2001.
[91] Humphrey, J. et al. Unobstructed and obstructed rotating disk
fl
ows:
A summary review relevant to information storage system, in Bhusan,
B., editor Advances in Information Storage Systems, pp. 79-110. ASME
Press, NY, 1991.
[92] Hwang, C.C., Cheng, S.P. and Chang, C.M. Design of high-performance
spindle motors with concentrated windings, IEEE Transactions on Mag-
netics, Vol. 41, No. 2, pp. 971-973, February 2005.
[93] Iizuka, K. et al. Microcomputer control for sensorless brushless motor,
IEEE Transaction on Industry Applications, Vol. IA-21, No. 4, pp. 595-
601, May-June 1985.
[94] Inoue, T. et al. Improvement of RRO using hybrid-type STW for hard
disk drives, IEEE Transactions on Magnetics, Vol. 37, No. 2, pp. 969-973,
March 2001.
[95] Ioannou, P.A., Xu, H. and Fidan, B., Servo control design for a hard
disk drive based on estimated head position at high sampling rates, Pro-
ceedings of the American Control Conference, 2003, Vol 1, pp. 731-736,
June 4-6, 2003.
[96] Ioannou, P.A., Kosmatopoulos, E.B. and Despain, A.M., Position error
signal estimation at high sampling rates using data and servo sector
measurements, IEEE Transactions on Control Systems Technology,Vol.
11, No. 3, pp. 325-334, May 2003.
[97] Ishida, T. et al. Printed media technology for an effective and inexpensive
servo track writing of HDDs, IEEE Transactions on Magnetics, Vol. 37,
No. 4, pp. 1875-1877, July 2001.
[98] Ishida, T. et al. Magnetic printing technology - application to HDD,
IEEE Transactions on Magnetics, Vol. 39, No. 2, Part 1, pp. 628-632,
March 2003.
[99] Ishikawa, J. and Tomizuka, M. Pivot friction compensation using an ac-
celerometer and a disturbance observer for hard disk drives, IEEE-ASME
Transactions on Mechatronics, Vol. 3, No. 3, pp. 194-201, September
1998.
