Hardware Reference
In-Depth Information
[74] Harker, J.M. et al. A quarter century of disk
fi
le innovation IBM Journal
of Research and Development, Vol. 25, No. 5, pp. 677-689, September
1981.
[75] Harnoy, A. BearingDesigninMachinery, Marcel Dekker, Inc, 2002.
[76] Heath, J. Simple approach to improve actuator bandwidth, Data Storage,
pp. 48-60, September 2000.
[77] Hendershot, J.R. and Miller, T.J.E. Design of Brushless Permanent Mag-
net Motors, Magna Physics Publishing and Oxford University Press,
1994.
[78] Herrmann G. et al. Practical implementation of a novel anti-windup
scheme in a HDD-dual-stage servo-system, IEEE/ASME Transactions
on Mechatronics, Vol. 9, No. 3, pp. 580-592, September 2004.
[79] Heo, B. and Shen, I.Y. Taming disk and spindle rocking by damped lam-
inated disks - an experimental study, IEEE Transactions on Magnetics,
Vol. 35, No. 5, pp. 2304-2306, September 1999.
[80] Hindmarsh, J. Electrical Machines and Their Applications, Pergamon
Press, 1984.
[81] Hipwell, R. et al. MEMS enhance hard disk drive performance,
http://www.waferprocessing.unaxis.com/en/download/mems.pdf.
[82] Ho, H.T. Fast servo bang-bang seek control, IEEE Transactions on Mag-
netics, Vol. 33, No. 6, pp. 4522-4527, November 1997.
[83] Ho, H.T. Noise impact on servo TMR, Proceedings of the American Con-
trol Conference, New Mexico, Vol. 5, pp. 2906-2909, June 1997.
[84] Horowitz, R. and Li, B. Adaptive tracking-following servos for disk
fi
le
actuators, IEEE Transactions on Magnetics, Vol. 32, No. 3, pp. 1779-
1786, 1996.
[85] Horsley, D.A. et al. Design and fabrication of an angular microactuator
for magnetic disk drives, Journal of Microelectromechanical Systems,Vol.
7, No. 2, pp. 141-148, June 1998.
[86] Hredzak, B., Guo, G. and Zhang, J. Investigation of the effect of hard disk
drive unbalance on repeatable and non-repetable runout, Proceedings of
IEEE International Conference on Power Electronics & Drive Systems,
PEDS, pp. 1359-1363, Nov. 17-20, 2003.
[87] Hredzak, B. and Guo, G. New passive balancing algorithm for high den-
sity hard disk drives, Journal of Mechanical Engineering Science, Pro-
ceedings of Institution of Mechanical Engineers of UK, Vol. 218, No. 4,
pp. 401-410, April 2004.
