Environmental Engineering Reference
In-Depth Information
38. Hogarth WHJ, benzinger JB (2006) Operation of polymer electrolyte membrane fuel cells
with dry feeds: design and operating strategies. J Power Sources 159:968-978
39. Liu F, Yi B, Xing D, Yu J, Hou Z, Fu Y (2003) Development of novel self-humidifying
composite membranes for fuel cells. J Power Sources 124:81-89
40. Hussain MM, Dincer I, Li X (2007) A preliminary life cycle assessment of PEM fuel cell
powered automobiles. Appl Therm Eng 27:2294-2299
41. Granovskii M, Dincer I, Rosen MA (2006) Life cycle assessment of hydrogen fuel cell and
gasoline vehicles. Int J Hydrogen Energ 31:337-352
42. Wagner U, Eckl R, Tzscheutschler P (2006) Energetic life cycle assessment of fuel cell
powertrain systems and alternative fuels in Germany. Energ J 31:3062-3075
43. Barbir F (2005) Fuel cells theory and practice. Elsevier, Burlington, MA
44. Pei P, Ouyang M, Lu Q, Huang H, Li X (2004) Testing of an automotive fuel cell system. Int
J Hydrogen Energ 29:1001-1007
45. Ahluwalia RK, Wang X (2005) Direct hydrogen fuel cell systems for hybrid vehicles.
J Power Sources 139:152-164
46. Corbo P, Migliardini F, Veneri O (2009) PEFC stacks as power sources for hybrid propulsion
systems. Int J Hydrogen Energ 34:4635-4644
47. Wishart J, Dong Z, Secanell M (2006) Optimization of a PEM fuel cell system based on
empirical data and a generalized electrochemical semi-empirical model. J Power Sources
161:1041-1055
48. Philipps F, Simons G, Schiefer K (2006) Dynamic investigation of PEFC stacks in interaction
with the air supply system. J Power Sources 154:412-419
49. Corbo P, Migliardini F, Veneri O (2008) Experimental analysis of a 20 kWe PEM fuel cell
system in dynamic conditions representative of automotive applications. Energ Convers
Manage 49:2688-2697
50. Zhao H, Burke AF (2009) Optimization of fuel cell system operating conditions for fuel cell
vehicles. J Power Sources 186:408-416
51. Ahluwalia RK, Wang X (2006) Rapid self-start of polymer electrolyte fuel cell stacks from
subfreezing temperatures. J Power Sources 162:502-512
52. Jiao K, Li X (2009) Three-dimensional multiphase modeling of cold start processes in
polymer electrolyte membrane fuel cells. Electrochim Acta 54:6876-6891
53. Bar-On I, Kirchain R, Roth R (2002) Technical cost analysis for PEM fuel cells. J Power
Sources 109:71-75
54. Mert SO, Dincer I, Ozcelik Z (2007) Exergoeconomic analysis of a vehicular PEM fuel cell
system. J Power Sources 165:244-252
55. Qi Z, Kaufman A (2003) Low Pt loading high performance cathodes for PEM fuel cells.
J Power Sources 113:37-43
56. Zeis R, Mathur A, Fritz G, Lee J, Erlebacher J (2007) Platinum-plated nanoporous gold: an
efficient, low Pt loading electrocatalyst for PEM fuel cells. J Power Sources 165:65-72
57. Wu H, Wexler D, Wang G (2009) Pt
x
Ni alloy nanoparticles as cathode catalyst for PEM fuel
cells with enhanced catalytic activity. J Alloy Compd 488:195-198
58. Ramaswamy N, Arruda TM, Wen W, Hakim N, Saha M, Gullà A, Mukerjee S (2009)
Enhanced activity and interfacial durability study of ultra low Pt based electrocatalysts
prepared by ion beam assisted deposition (IBAD) method. Electrochim Acta 54:6756-6766
59. Wu J, Yuan XZ, Martin JJ, Wang H, Zhang J, Shen J, Wu S, Merida W (2008) A review of
PEM fuel cell durability: degradation mechanisms and mitigation strategies. J Power Sources
184:104-119
