Database Reference
In-Depth Information
Once the connection is made, you will see a login prompt to the ILOM. You need to use the root account and the
default root password (changeme) to connect to the ILOM.
An initial configuration of the ILOM should have no IP configuration. You can validate that this is the case by
issuing the following command:
# show /SP/network
The Oracle Appliance Kit deployment can set IP networking details of the ILOM, but it is always faster to
configure the ILOM IP addresses using the method we describe next. It allows a faster deployment by using the ILOM
to deploy the ODA. You need the following information to be able to set the IP configuration for the ILOM for both
ODA servers:
•
Public IP address
•
Netmask
•
Gateway address
Depending on your requirements, a static IP or a dynamic IP (DHCP) address can be assigned to the ILOM.
The following is an example of assigning a static IP address:
# set /SP/network pendingipdiscovery=static pendingipaddress=1.2.2.65 pendingipnetmask=255.255.255.0
pendingipgateway=1.2.2.254 commitpending=true
Each ODA has two server nodes, and thus also has two ILOMs. The network configuration has to be performed
twice, once for every ILOM. After the IP configuration has been established, SSH access via a browser should be available.
Navigating to the IP address of the ILOM via a browser should result in a screen like that shown in Figure
2-10
.
Figure 2-10.
ILOM screen via browser
