Database Reference
In-Depth Information
RESULT: ilom alertmgmt level is set to minor
RESULT: ilom alertmgmt type is set to snmptrap
RESULT: alertmgmt snmp_version is set to 2c
RESULT: alertmgmt community_or_username is set to public
RESULT: alertmgmt destination is set to x.x.x.x
RESULT: alertmgmt destination_port is set to 1162
SUCCESS: Ilom snmp confguration for asr set correctly
RESULT: notification trap configured to ip:x.x.x.x
RESULT: notification trap configured to port:1162
SUCCESS: Asr notification trap set correctly
INFO: IP_ADDRESS HOST_NAME SERIAL_NUMBER ASR PROTOCOL SOURCE PRODUCT_NAME
INFO: ---------- --------- ------------- ------- -------- ------ ------------------------
INFO: x.x.x.x oda1-ilom 9243FMW000 Enabled SNMP ILOM SUN FIRE X4370 M2 SERVER
INFO: x.x.x.x oda2-ilom 9243FMW000 Enabled SNMP ILOM SUN FIRE X4370 M2 SERVER
INFO: x.x.x.x oda1 9243FMW000 Enabled SNMP FMA SUN FIRE X4370 M2 SERVER
x86/x64 System
INFO: 1x.x.x.x oda2 9243FMW000 Enabled SNMP FMA SUN FIRE X4370 M2 SERVER
x86/x64 System
INFO: Please use My Oracle Support '
http://support.oracle.com
'
to view the activation status.
SUCCESS: successfully set asr log level to Fine.
RESULT: Registered with ASR backend.
RESULT: test connection successfully completed.
RESULT: submitted test event for asset:
RESULT: bundle com.sun.svc.asr.sw is in active state
RESULT: bundle com.sun.svc.asr.sw-frag is in resolved state
RESULT: bundle com.sun.svc.asr.sw-rulesdefinitions is in resolved state
RESULT: bundle com.sun.svc.ServiceActivation is in active state
SUCCESS: ASR diag successfully completed
As part of the test, a message that confirms a successful check is e-mailed. It is very important to ensure that this
e-mail message is received by the ASR administrator. The administrator's e-mail address is set up when the assets
are activated, and can be checked by logging in at
http://support.oracle.com
.
Figure
7-1
shows a sample image of
a successfully sent e-mail message.
Figure 7-1.
E-mail confirming ASR validation of Service Request (SR) create
Oracle has added testing capabilities to ODA 2.6 to allow simulations for bad disks and other hardware events.
This is very important because, in the past, simulating and confirming that the ASR was actually working was not a
very easy task. The addition of testing capabilities makes that task much easier.
