Database Reference
In-Depth Information
SUCCESS: HDD_E0_S01_373737516 has both the paths up and active
....
....
SUCCESS: HDD_E0_S18_373750584 has both the paths up and active
RESULT: Disk HDD_E0_S19_373760780 path1 status active device sdt with status active path2
status active device sdar with status active
SUCCESS: HDD_E0_S19_373760780 has both the paths up and active
RESULT: Disk SSD_E0_S20_805834037 path1 status active device sdu with status active path2
status active device sdas with status active
SUCCESS: SSD_E0_S20_805834037 has both the paths up and active
RESULT: Disk SSD_E0_S21_805834107 path1 status active device sdv with status active path2
status active device sdat with status active
SUCCESS: SSD_E0_S21_805834107 has both the paths up and active
RESULT: Disk SSD_E0_S22_805834081 path1 status active device sdw with status active path2
status active device sdau with status active
SUCCESS: SSD_E0_S22_805834081 has both the paths up and active
RESULT: Disk SSD_E0_S23_805834056 path1 status active device sdx with status active path2
status active device sdav with status active
SUCCESS: SSD_E0_S23_805834056 has both the paths up and active
Any devices that are not in a successful state should be evaluated immediately. Any reported issues should be
looked at, and an Oracle support ticket should be immediately opened to resolve any problem that is found.
Network Components
The ODA comes with public as well as private interfaces to allow network connectivity to the outside world, and
internal network connectivity for the server nodes and the cluster to communicate. There is a difference between
the ways a virtualized ODA sees network components in comparison to a bare-metal installation. ODA V1 has 2x
1GbE interfaces for the interconnect, 2x3 1GbE interfaces for public connectivity, as well as a two-port 10GbE SFP+
interface. ODA X3-2 went in a different direction with all 10GbE ports (copper) All ports are set up as active/passive at
the operating system.
Listing 7-9 shows the output that one will see from a component validation on an ODA V1.
Listing 7-9.
Validating ODA V1 Network Components
[root@oda1 bin]# ./oakcli validate -c NetworkComponents
INFO: Doing oak network checks
RESULT: Detected active link for interface eth0 with link speed 1000Mb/s -- Interconnect
RESULT: Detected active link for interface eth1 with link speed 1000Mb/s -- Interconnect
WARNING: No Link detected for interface eth2 -- unused network
WARNING: No Link detected for interface eth3 -- unused network
RESULT: Detected active link for interface eth4 with link speed 1000Mb/s -- 1Gbe network Active
RESULT: Detected active link for interface eth5 with link speed 1000Mb/s -- 1Gbe network Passive
WARNING: No Link detected for interface eth6
WARNING: No Link detected for interface eth7
RESULT: Detected active link for interface eth8 with link speed 10000Mb/s -- 10Gbe Network Active
RESULT: Detected active link for interface eth9 with link speed 10000Mb/s --10Gbe Network Passive
INFO: Checking bonding interface status
WARNING: Bond interface bond0 has the following current status:down
RESULT: Bond interface bond0 is down configured in mode:fault-tolerance (active-backup)
with current active interface as None
