Environmental Engineering Reference
In-Depth Information
[31] Desbiens A, del Villar R, Milot M (1998) Identification and gain-scheduled control of a pilot
flotation column. 9th IFAC Symp. on Automation in Mining, Mineral & Metal Processing,
Cologne (Germany), 337-342
[32] Maldonado M, Desbiens A, del Villar R, Chirinos J (2008) On-line bias estimation using
conductivity measurements. Minerals Engineering 21:851-855
[33] Maldonado M, Desbiens A, del Villar R (2008) Decentralized control of a pilot flotation
column: a 3X3 system. Canadian Metallurgical Quarterly 47:377-386
[34] Maldonado M, Desbiens A, del Villar R (2009) Potential use of model predictive control
for optimizing the column flotation process. International Journal of Mineral Processing
93(1):26-33
[35] Carvalho MT, Durao F (2002) Control of a flotation column using fuzzy logic inference.
Fuzzy Sets and Systems 125:121-133
[36] Persechini MAM, Peres AEC, Jota FG (2004) Control strategy for a column flotation pro-
cess. Control Engineering Practice 12:963-976
[37] Nunez E, Desbiens A, del Villar R, Duchesne C (2006) Multivariable predictive control of
a pilot flotation column. Part 1: Online sensors for froth depth and air hold-up. International
Conference on Mineral Process Modelling, Simulation and Control (E. Yalcin and H. Shang,
Eds). Sudbury, Ontario (Canada), 291-301
[38] Uribe-Salas A (1991) Process measurements in flotation columns using electrical conductiv-
ity. Ph.D. thesis, Department of Mining and Metallurgical Engineering, McGill University,
Montreal (Canada)
[39] Marchese M, Uribe-Salas A, Finch JA (1992) Measurement of gas holdup in a three-phase
concurrent down-flow column. Chemical Engineering Science 47(13-14):3475-3482
[40] Perez-Garibay R, del Villar R (1999) On-line gas hold-up measurement in flotation columns.
Canadian Metallurgical Quarterly 38(2):141-148
[41] Arizmendi-Morquecho AM, Perez-Garibay R, Uribe-Salas A, Nava-Alonso F (2002) On-
line solids hold-up measurement in mineral slurries by standard addition method. Minerals
Engineering 15(1-2):61- 64
[42] Taveras FJ, Gomez CO, Finch JA (1996) A novel gas hold-up probe and applications in
flotation columns. Trans of I.M.M., Sect. C 105:C99-C104
[43] O'Keefe C, Viega J, Fernald M (2007) Application of passive sonar technology to mineral
processing and oil sands application. Proceedings of the 39th Annual Meeting of the Cana-
dian Mineral Processors, CIM, Ottawa (Canada), 429-457
[44] Gorain BK, Franzidis J-P, Manlapig EV (1995) Studies on impeller type, impeller speed and
air flow rate in an industrial-scale flotation cell - Part 2: Effect on gas hold-up. Minerals
Engineering 12:1557-1570
[45]
Power A, Franzidis JP, Manlapig EV (2000) The characterization of hydrodynamic condi-
tions in industrial flotation cells. In Proceedings of AusIMM 7th Mill Operators Conference,
Australasian Institute of Mining and Metallurgy, Kalgoorlie, 243-255
[46]
Deglon DA, Egya-Mensah D, Franzidis, JP (2000) Review of hydrodynamics and gas dis-
persion properties in flotation cells in South African platinum concentrators. Minerals Engi-
neering 13(3):235-244
[47]
Yianatos JB, Bergh L, Condori P, Aguilera J (2001) Hydrodynamic and metallurgical
characterization of industrial flotation banks for control purposes Minerals Engineering
14(9):1033-1046
[48]
Grau R, Heiskanen K (2003) Gas dispersion measurements in flotation cell. Minerals Engi-
neering 16:1081-1089
[49]
Randall EW, Goodall CM, Fairlamb PM, Dold PL, O'Connor CT (1989) A method for mea-
suring the sizes of bubbles in two- and three-phase systems. Journal of Physics, Section E,
Scientific Instrumentation 22:827-833
[50]
Tucker JP, Deglon DA, Franzidis JP, Harris MG, O'Connors CT (1994) An evolution of a
direct method of bubble size distribution measurement in a laboratory batch flotation cell.
Minerals Engineering 7(5-6):667-680
Search WWH ::
Custom Search