Environmental Engineering Reference
In-Depth Information
[66] Vaclavek V, Loucka M (1976) Selection of measurements necessary to achieve multicompo-
nent mass balance in chemical plants. Chemical Engineering Science 31:1199-1205
[67] Mazzour EH, Hodouin D, Makni S (2003) Une aide algorithmique a l'optimisation du place-
ment des capteurs dans un proced. Journal Europeen des systemes automatises 37:1251-
1276
[68] Crowe CM, Garcia Campos GY, Hrymak A (1983) Reconciliation of process flow rates by
matrix projection. AIChE Journal 29: 881-888
[69] Kelly JD (1998) On finding the matrix projection in the data reconciliation solution. Com-
puters and Chemical Engineering 22(11):1553-1557
[70] Berton A, Hodouin D (2002) Linear and bilinear fault detection and diagnosis based on mass
and energy balance equations. Control and Engineering Practice 11:103-113
[71] Sanchez M, Romagnoli JA (1996) Use of orthogonal transformations in data classification-
reconciliation. Computers and Chemical Engineering 20(5):483-493
[72] Hodouin D, Alliot N, Flament F (1991) Redundancy analysis of complex sets of mineral
processing data for mass balance computation. International Journal of Mineral Processing
32(3-4):213-231
[73] Almasy GA, Mah RSH (1984) Estimation of measurement error variances from process data.
Industrial Engineering Chemistry Process Research and Development. 23:779-784
[74] Keller JY, Zasadzinski M, Darouach M (1992). Analytical estimator of measurement error
variances in data reconciliation. Computers and Chemical Engineering 16:185-188
[75] Chen J, Bandoni A, Romagnoli JA (1997) Robust estimation of measurement error vari-
ance/covariance from process sampling data. Computers and Chemical Engineering 21:593-
600
[76] Lachance L, Poulin E, Hodouin D, Desbiens A (2006b) Performance of steady-state and sta-
tionary data reconciliation as a function of process disturbances dynamics. Mineral Process
Modeling, Simulation and Control Conference, Laurentian University, Sudbury, Canada,
393-408
[77] Poulin E, Hodouin D, Lachance L (2009) Impact of plant dynamics on the performance of
steady-state data reconciliation. submitted to Computers and Chemical Engineering
[78] Poulin E, Hodouin D, Lachance L (2009) Estimation of measurement error variances in data
reconciliation using a flow distribution model. Proc. IFAC SYSID'2009, St Malo, France
[79] Hodouin D, Ketata C (1993) Variance of average stream compositions obtained by automatic
incremental sampling. International Journal of Mineral Processing 40(3-4):199-223
[80] Mirabedini A, Hodouin D (1998) Calculation of variance and covariance of sampling errors
in complex mineral processing systems, using state-space dynamic models. International
Journal of Mineral Processing 55(1):1-20
[81]
Maquin D, Ragot J, Darouach M, Fayolle J (1988) Validation des mesures par quilibrage
hierarchis ´edebilans-matiere. International Journal of Mineral Processing 23:241-252
[82]
Schraa OJ, Crowe CM (1996) The numerical solution of bilinear problems using uncon-
strained optimization methods. Event of the European Federation of Chemical Engineers
20:S727-S730.
[83]
Stanley GM, Mah RSH (1977) Estimation of flows and temperatures in process networks.
AIChE Journal 23(5):642-650
[84]
Kelly JD (2004) Techniques for solving industrial nonlinear data reconciliation problems.
Computers and Chemical Engineering 28:2837-2843
[85]
Arora N, Biegler LT, Heyen G (2002) Data reconciliation framework. Software architecture
and tools for computer aided process engineering. Computer Aided Chemical Engineering
11:193-212
[86]
Schladt M, Hu B (2007) Soft sensors based on nonlinear steady-state data reconciliation in
the process industry. Chemical Engineering and Processing 46(11):1107-1115
[87]
Bazin C (1999) Personal communication.
[88]
Flament F, Hodouin D, Bazin C (1986) Propagation of measurement errors in mass balance
calculation of mineral processing data. Proceedings of APCOM'86, Pennsylvania State Uni-
versity Editor, SME-AIME.
Search WWH ::




Custom Search