Graphics Reference
In-Depth Information
5.
Activate the
Helix
command (on the ribbon, click
Curve > Curve > Helix
)
and select the center point of the lower intersection curve.
6.
On the
Helix
dialog, under the
Size
section, select
Law Type > Linear
.
7.
Click the down arrow next to the
Start Value
box and select
Measure
. On
the
Measure
dialog, select
Type > Diameter
and click on the lower inter-
section curve. Click
OK
.
8.
Click the down arrow next to the
End Value
box and select
Measure
. On
the
Measure
dialog, select
Type > Diameter
and click on the upper inter-
section curve. Click
OK
.
9.
Type-in 5 in the
Value
box under the
Pitch
section.
10.
Under the
Turns
section, type-in 2 in the
Turns
box and click
OK
.
11.
Hide the intersection curves and datum planes.