Graphics Reference
In-Depth Information
7.
Activate the
Emboss
command (on the ribbon, click
Home > Feature >
More > Emboss
) and click on the sketch.
8.
On the
Emboss
dialog, click
Face to Emboss > Select Face
and click on the
bottom face.
9.
Under the
End Cap
section, select
Geometry > Embossed Faces
.
10.
Select
Location > Translate
and type-in 2.5 in the
Distance
box.
11.
Under the
Draft
section, type-in 50 in the
Angle 1
box. Click
OK
to add
emboss.
12.
Activate the
Edge Blend
command and blend the sharp edges of the emboss
features. The blend radius is 2 mm.
