Environmental Engineering Reference
In-Depth Information
Bellott, R., Ghionna, V., Jamiolkowsk, M. and Robertson, P.K. (1989). Shear strength of sand from
CPT.
Proc. 12th International Congress Soil Mechanics and Foundation Engineering
, Rio de
Janeiro. Vol. 1, 179-184, Balkema.
Bellport, B.P. (1967). Bureau of Reclamation experience in stabilizing embankment of Fontenelle
Dam.
Ninth International Congress on Large Dams
, Istamboul, Q.32, R.5, 67-79. International
Commission on Large Dams, Paris.
Benson, R.C. and Yuhr, L.B. (1987). Assessment and long-term monitoring of localized subsidence
using ground penetrating radar, in
Karst Hydrogeology
, Beck, B.F. and Wilson, W.L. (eds),
Balkema, 161-169.
Bentel, D., Robbertze, J. and Smith, M. (1982). The use and behaviour of geotextiles in underdrainage
systems of gold mine tailings dam in South Africa.
Second Int. Conf. on Geotextiles
,
Las Vegas
.
Bertacchi, P. and Bellotti, R. (1970). Experimental research on materials for rockfill dams.
Tenth
Congress on Large Dams
, Montreal, Q36, 511-529, International Commission on Large Dams,
Paris.
Bertacchi, P. and Cazzuffi, D. (1985).
Geotextile filters for embankment dams
. Water Power and
Dam Construction.
Bertram, G.E. (1940). An experimental investigation of protective filters. Graduate School of
Engineering, Harvard University,
Soil Mechanics Series 7
.
Bertram, G.E. (1972). Field tests for compacted rockfill, in
Embankment Dam Engineering
,
Casagrande Volume, editors, Hirschfeld, R.C. and Poulos, S.J. 1-20, Wiley.
Bickel, J.O. and Kuesel, T.R. (1992).
Tunnel Engineering Handbook
. Krieger Publishing Company,
Florida.
Bieniawski, Z.T. (1978). Determining rock mass deformability: experience from case histories,
International Journal for Rock Mechanics, Mining Sciences and Geomechanical Abstracts
, 15,
237-247.
Bishop, A.W. and Henkel, D.J. (1957, 1971). The measurement of soil properties in the triaxial test -
Edward Arnold.
Bishop, A.W. (1955). The use of the slip circle in the stability analysis of slopes.
Geotechnique
, 5(1),
7-17.
Bishop, A.W. (1971). Shear strength parameters for undisturbed and remoulded soil specimens.
Proceedings of the Roscoe Memorial Symposium
, Cambridge University. Edited by Parry, R.G.,
Foulis, G.T., Oxfordshire, 3-58.
Bishop, A.W., Green, G.E., Garga, V.K., Andressen, A. and Brown, J.D. (1971). A new ring shear
apparatus and its application to the measurement of residual strength.
Geotechnique
, 21, 273-328.
Bjerrum, L. (1967). Progressive failure in slopes of overconsolidated plastic clay and clay shales.
The Third Terzaghi Lecture, JASCE, Vol. 93, SM5, 3-49.
Bjerrum, L. (1973). Problems of soil mechanics and construction of soft clays and structurally
unstable soils (collapsible, expansive and others) State of the Art report,
Proc. 8th Int. Conf. Soil
Mechanics and Foundation Engineering
, Moscow, Vol. 3, 111-160.
Black, D.K. and Lee, K.L. (1973). Saturating laboratory samples by back pressure.
J.
ASCE Vol. 99,
No. SM1, 75-93.
Blight, G.B. and Bentel, G.M. (1983). The behaviour of mine tailings during hydraulic deposition.
J. South African Inst. Min. Metall.
, Vol. 83 No. 4, 73-86.
Blight, G.E. (1963). The effect of non uniform pore pressures on laboratory measurements of the
shear strength of soils.
Laboratory Shear Testing of Soils
, ASTM STP No. 361, 173-174.
Blight, G.E. (1987). The concept of the master profile for tailings dam beaches in
Prediction and
Performance in Geotechnical Engineering
, Calgary. Balkema.
Blight, G.E. (1988). Some less familiar aspects of hydraulic fill structures, in
Hydraulic Fill
Structures
, edited by D.J.A. Van Zyl and S.G. Vick, ASCE Geotech. Special Pub. No. 21,
1000-1064.
Blight, G.E. and Caldwell, J.A. (1984). The abatement of pollution from abandoned gold-residue
dams.
J.South African Inst. Min. Metall.
, Vol. 84, No. 1, 1-9.
Blight, G.E., Thomson, R.R. and Vorster, G.K. (1985). Profiles of hydraulic fill tailings beaches and
seepage through hydraulically sorted tailings.
J.South African Inst. Min. Metall.
, Vol. 85, No. 5,
157-161.
Blyth, F.G.H. and de Freitas, M.H. (1989).
A Geology for Engineers
, (7th ed revised), Edward
Arnold.
