Environmental Engineering Reference
In-Depth Information
ANCOLD (1990). Dams in Australia . Australian National Committee on Large Dams, Melbourne.
ANCOLD (1991). Guidelines on design criteria for concrete gravity dams . Australian National
Committee on Large Dams, Melbourne.
ANCOLD (1998). Guidelines for design of dams for earthquake . Australian National Committee
on Large Dams, Melbourne.
ANCOLD (1999). Guidelines on dam safety management . Australian National Committee on
Large Dams, Melbourne . ISBN 0 731 027 620.
ANCOLD (2000). Dam Technology in Australia , 1850-1999. Editor B. Cole. Australian National
Committee on Large Dams Inc., Melbourne. ISBN 095 7830 807.
ANCOLD (2000). Guidelines on selection of an acceptable flood capacity for dams . Australian
National Committee on Large Dams. Melbourne .
ANCOLD (2003). Guidelines on dam safety management . Australian National Committee on
Large Dams, Melbourne. ISBN 0731 027 620.
Andrews, R.C. (2003). Personal communication. Infra Techno Consultants (Australia) Pty Ltd .
Andrus, R.D. and Stokoe, K.H., II (2000). 'Liquefaction resistance of soils from shear-wave veloc-
ity'. J. Geotech. and Geoenvir. Engrg. , ASCE, Vol. 126, No. 11, 1015-1025.
Andrus, R.D. and Stokoe, K.H. (1997). Liquefaction resistance based on shear wave velocity. Proc.,
NCEER workshop on evaluation of liquefaction resistance of soils , Nat. Ctr. for Earthquake
Engrg. Res., State University of New York at Buffalo, 89-128.
Ang, C.L.D. (2001). Performance of Concrete Face Rockfill Dams . Thesis (unpublished), Bachelor
of Engineering, School of Civil and Environmental Engineering, The University of New South
Wales.
Arnao, B.M., Garga, V.K., Wright, R.S. and Perez, J.Y. (1984). The Tablachaca Slide No. 5, Peru,
and its stabilization. Proc. 4th Intl. Symp. on Landslides, Montreal , 597-604.
Arulanandan, K. and Perry, E.B. (1983). Erosion in relation to filter design criteria in earth dams.
Journal of the Geotechnical Engineering Division , ASCE, 109 (GT5), 682-698.
Arulanandan, K., Loganathan, P. and Krone, R.B. (1975). Pore and eroding fluid influences on surface
erosion of soils. Journal of the Geotechnical Engineering Division , ASCE, 101 (GT1), 55-66.
ASTM (1968). Standard test method for capillary - moisture relationships for coarse- and medium-
textured soils by porous-plate apparatus , ASTM D2325-68. American Society for Testing and
Materials, Philadelphia.
ASTM (1972). Standard test method for capillary-moisture relationships for tine-textured soils by
pressure-membrane apparatus , ASTM D3152-72. American Society for Testing and Materials,
Philadelphia.
ASTM (1974a). Standard recommended practice for petrographic examination of aggregates for
concrete . ASTM Book of Standards, 14 (C295-65), 209-218.
ASTM (1974b). Standard method of tests for potential reactivity of aggregates (chemical method).
ASTM Book of Standards, 14 (C289-71), 186-195.
ASTM (1974c). Standard method of tests for potential alkali reactivity of cement-aggregate combi-
nations (mortar-bar method) . ASTM Book of Standards, 14 (C227-71), 142-147.
ASTM (1992). Standard test method for measurement of soil potential (suction) using filter paper ,
ASTM D5298-92. American Society for Testing and Materials, Philadelphia.
ASTM (1998). American Society for Testing and Materials, Volume 04.08.
ASTM (2001). American Society for Testing and Materials, Volume 04.08.
Atkinson, J.H. and Evans, J.S. (1984). Discussion on “The measurement of soil stiffness in the tri-
axial apparatus”. Geotechnique , Vol. 35, No. 3, 378-382.
Aufleger, M., Strobl, T. and Dornstädter, J. (2000). Fibre optic temperature measurements in dam
monitoring - four years of experience. 20th Congress on Large Dams, Beijing 2000. Q78-R.1,
157-170. International Commission on Large Dams, Paris.
Azzouz, A.S., Baligh, M.M. and Ladd, C.C. (1983). Corrected field vane strength for embankment
design. Proc. ASCE J.Geotech. Eng. Div. , Vol. 109, No. GT5, 730-734.
Bakker, K.J. (1987). Hydraulic filter criteria for banks, European Conference on Soil Mechanics and
Foundation Engineering , Dublin.
Bakker, K.J., Breteler, M.K. and den Adel, H. (1990). New criteria for filters and geotextile filters
under revetments. Int. Conf. on Coastal Engineering , Delft.
Baldi, G., Hight, D. and Romas, G. (1988). A Re-evaluation of conventional triaxial test methods
in Advanced Triaxial Testing of Soil and Rock , ASTM STP 977, Robert T. Donaghe, Ronald, C.
Search WWH ::




Custom Search