Hardware Reference
In-Depth Information
To connect to the lamp to the project, I used a standard pair of power plugs with bare cables
at the end, with one female socket (to plug the lamp in) and one male socket (to plug it into
the power socket in the wall). This is a picture of the cables I used:
Note that you can perfectly test this project without having anything connected to the relay:
you can build the Arduino part first, and then decide which device you want to connect to
it later.
This a list of the components that are required for this project:
•
Arduino Uno (
http://www.pololu.com/product/2191
)
•
Arduino Ethernet Shield (
https://www.adafruit.com/product/201
)
•
Relay module (
http://www.pololu.com/product/2480
)
•
Female/male jumper wires (
https://www.adafruit.com/products/824
)
On the software side, you will of course need the usual Arduino IDE. You also need the
Teleduino library, which you can download at:
