Civil Engineering Reference
In-Depth Information
Delgado M, Lázaro A, Mazo J, Zalba B (2012) Review on phase change material emulsions and
microencapsulated
phase
change
material
slurries:
materials,
heat
transfer
studies
and
applications. Renew Sustain Energ Rev 16:253-273
Farid MM, Khudhair AM, Razack SAK, Al-Hallaj S (2004) A review on phase change energy
storage: materials and applications. Energy Convers Manage 45:1597-1615
Kenisarin M, Mahkamov K (2007) Solar energy storage using phase change materials. Renew
Sustain Energ Rev 11:1913-1965
Kodo T, Ibamoto T (2002) Research on using the PCM for ceiling board, IEA ECES IA, Annex
17, 3rd workshop. Tokyo, Japan, 1-2Oct
Kuznik F, Virgone J (2009) Experimental investigation of wallboard containing phase change
material: data for validation of numerical modelling. Energ Build 41:561-570
Kuznik F, Virgone J, Noel J (2008a) Optimization of a phase change material wallboard for
building use. Appl Therm Eng 28:1291-1298
Kuznik F, Virgone J, Roux JJ (2008b) Energetic efficiency of room wall containing PCM
wallboard: a full-scale experimental investigation. Energ Build 40:148-156
Kuznik F, Virgone J, Johannes K (2011) In-situ study of thermal comfort enhancement in a
renovated
building
equipped
with
phase
change
material
wallboard.
Renew
Energ
36:1458-1462
Mandilaras I, Stamatiadou M, Katsourinis D, Zannis G, Founti M (2013) Experimental thermal
characterization of a Mediterranean residential building with PCM gypsum board walls. Build
Environ 61:93-103
Mehling H, Cabeza LF (2007) Phase change materials and their basic properties. In: Paksoy HO
(ed) Thermal energy storage for sustainable energy consumption: fundamentals, case studies
and design. Kluwer Academic Publishers Group, pp 257-278
Mehling H, Cabeza LF (2008) Heat and cold storage with PCM. An up to date introduction into
basics and applications. Springer, USA
Nagano K, Mochida T, Iwata K, Hiroyoshi H, Domanski R, Rebow M (2000) Development of
new PCM for TES of the cooling system, Terrastock. In: Benner M, Hahne EWP (eds) 8th
international conference on thermal energy storage, pp 345-50
Rathod MK, Banerjee J (2013) Thermal stability of phase change materials used in latent heat
energy storage systems: a review. Renew Sustain Energy Rev 18:246-258
Schossig P, Henning H-M, Gschwander S, Haussmann T (2005) Micro-encapsulated phase-
change
materials
integrated
into
construction
materials.
Sol
Energ
Mater
Sol
Cells
89:297-306
Sharma A, Tyagi VV, Chen CR, Buddhi D (2009) Review on thermal energy storage with phase
change materials and applications. Renew Sustain Energy Rev 13:318-345
Soares N, Costa JJ, Gaspar AR, Santos P (2013) Review of passive PCM latent termal energy
storage systems towards buildings' energy efficiency. Energ Build 201(59):82-10
Tyagi VV, Kaushik SC, Tyagi SK, Akiyama T (2011) Development of phase change materials
based microencapsulated technology for buildings: a review. Renew Sustain Energy Rev
15:1373-1391
Youssef Z, Delahaye A, Huang L, Trinquet F, Fournaison L, Pollerberg C, Doetsch C (2013)
State of the art on phase change material slurries. Energy Convers Manage 65:120-132
Zalba B, Marín JM, Cabeza LF, Mehling H (2003) Review on thermal energy storage with phase
change: materials, heat transfer analysis and applications. Appl Therm Eng 23:251-283
Zhang P, Ma ZW (2012) An overview of fundamental studies and applications of phase change
material slurries to secondary loop refrigeration and air conditioning systems. Renew Sustain
Energy Rev 16:5021-5058
Zhang P, Ma ZW, Wang RZ (2010) An overview of phase change material slurries: MPCS and
CHS. Renew Sustain Energy Rev 14:598-614
Zhao CY, Zhang GH (2011) Review on microencapsulated phase change materials (MEPCMs):
Fabrication, characterization and applications. Renew Sustain Energy Rev 15:3813-3832
Zhu N, Ma Z, Wang S (2009) Dynamic characteristics and energy performance of buildings using
phase change materials: a review. Energy Convers Manage 50:3169-3181
