Civil Engineering Reference
In-Depth Information
Forgacs J JS, In: Kadis S, Ciegler A, Ajl SJ (eds), Microbial Toxins. Academic Press, New York
Inc vol 8 pp 95-128
Foss WR, Bronkhorst CA, Bennett KA (2003) Simultaneous heat and mass transport in paper
sheets during moisture sorption from humid air. Int J Heat Mass Transf 46:2875-2886
Gibson LJ (2012) The hierarchical structure and mechanics of plant materials. J R Soc Interface
9:2749-2766
Gibson PW, Lee C, Ko F, Reneker D (2007) Application of nanofiber technology to nonwoven
thermal insulation. J Eng Fibers Fabr 2:32-40
Graupner N, Herrmann AS, Mussig J (2009) Natural and man-made cellulose fibre-reinforced
poly(lactic acid) (PLA) composites: An overview about mechanical characteristics and
application areas. Compos A Appl Sci Manuf 40:810-821
Greenkorn RA (1983) Flow phenomena in porous media. Marcel Dekker, New York
Abdul Khalil HPS, Bhat IUH, Jawaid M, Zaidon A, Hermawan D, Hadi YS (2012) Bamboo fibre
reinforced biocomposites: A review. Materials Design, 42, 353-368
Hager NE, Steere RC (1967) Radiant heat transfer in fibrous thermal insulation. J Appl Phys
38:4663-4668
Halpin JC, Kardos JL (1976) The Halpin-Tsai equations: a review. Polym Eng Sci 16:344-352
Hariharan ABA, Khalil HPSA (2005) Lignocellulose-based hybrid bilayer laminate composite:
part I—studies on tensile and impact behavior of oil palm fiber-glass fiber-reinforced epoxy
resin. J Compos Mater 39:663-684
Hassanizadeh SM, Gray WG (1979) General conservation equations for multi-phase systems 1.
averaging procedure. Adv Water Resour 2:131-144
Hatta H, Taya M (1986) Equivalent inclusion method for steady state heat conduction in
composites. Int J Eng Sci 24:1159-1172
Hendricks TJ, Howell JR (1994) Absorption/Scattering coefficients and scattering phase functions
in reticulated porous ceramics. In: Bayazitoglu Y (ed)
Henriksson G, Akin DE, Rigsby LL, Patel N, Eriksson K-EL (1997) Influence of chelating agents
and mechanical pretreatment on enzymatic retting of flax. Tex Res J 67:829-836
Hens H, Janssens A (1998) Application of a new type of air and vapor retarder in a self-drying
sloped roof with a cathedral ceiling. Thermal Perf Exte Env Build 7:15-27
Hill CAS, Khalil HPSA, Hale MD (1998) A study of the potential of acetylation to improve the
properties of plant fibres. Ind Crops Prod 8:53-63
Hokoi S, Kumaran MK (1993) Experimental and analytical investigations of simultaneous heat
and moisture transport through glass fiber insulation. J Thermal Insul Bldg Envs 16:263-292
Holman JP (1997) Heat transfer. McGraw-Hill, Inc, New York
Home T. C. C. E (2012) Fibre reinforced concrete
Hyvarinen A, Meklin T, Vepsalainen A, Nevalainen A.(2002) Fungi and actinobacteria in
moisture-damaged building materials — concentrations and diversity. Int Biodeter Biodegrad
49(1):27-37
Idicula M, Joseph K, Thomas S (2010) Mechanical performance of short banana/sisal hybrid fiber
reinforced polyester composites. J Reinf Plast Compos 29:12-29
INFOLINK
(2011)
Natural
fibre
insulation—benefiting
the
built
and
natural
environment
[Online]. Australia's Architecture, Building
Jawaid M, Khalil HPSA (2011) Cellulosic/synthetic fibre reinforced polymer hybrid composites:
a review. Carbohydr Polym 86:1-18
Karamanos A, Hadiarakou S, Papadopoulos AM (2008) The impact of temperature and moisture
on the thermal performance of stone wool. Energ Build 40:1402-1411
Karamanos A, Papadopoulos AM, Aravantinos D (2004) Heat transfer phenomena in fibrous
insulating materials. In: Proceedings of 2004 WSEAS/IASME international conference on
heat and mass transfer. Corfu, Greece
Kazragis A (2005) Minimization of atmosphere pollution by utilizing cellulose waste. J Environ
Eng Landscape Manage 13:81-90
Khalil HPSA, Bhat IUH, Jawaid M, Zaidon A, Hermawan D, Hadi YS (2012) Bamboo fibre
reinforced biocomposites: a review. Mater Des 42:353-368
