Civil Engineering Reference
In-Depth Information
Laverge J, Novoselac A, Corsi R et al (2013a) Experimental assessment of exposure to gaseous
pollutants from mattresses and pillows while asleep. Build Environ 59:203-210
Laverge J, Pattyn X, Janssens A (2013b) Performance assessment of residential mechanical
exhaust ventilation systems dimensioned in accordance with Belgian, British, Dutch, French
and ASHRAE standards. Build Environ 59:177-186
Laverge J, Van Den Bossche N, Heijmans N et al (2011) Energy saving potential and
repercussions on indoor air quality of demand controlled residential ventilation strategies.
Build Environ 46:1497-1503
Lawrence TM, Braun JE (2007) A methodology for estimating occupant CO
2
source generation
rates from measurements in small commercial buildings. Build Environ 42:623-639
Lazzarin RM, Gasparella A (1998) Technical and economical analysis of heat recovery in
building ventilation systems. Appl Therm Eng 18:47-67
Lee H-Y, Yang IT, Lin Y-C (2012a) Laying out the occupant flows in public buildings for
operating efficiency. Build Environ 51:231-242
Lee MC, Mui KW, Wong LT et al (2012b) Student learning performance and indoor
environmental quality (IEQ) in air-conditioned university teaching rooms. Build Environ
49:238-244
Lee S, Kwon G, Joo J et al (2012c) A finish material management system for indoor air quality of
apartment buildings (FinIAQ). Energy Build 46:68-79
Lee Y-K, Kim H-J (2012) The effect of temperature on VOCs and carbonyl compounds emission
from wooden flooring by thermal extractor test method. Build Environ 53:95-99
Lewtas J, Walsh D, Williams R et al (1997) Air pollution exposure-DNA adduct dosimetry in
humans and rodents: evidence for non-linearity at high doses. Mutat Res Fundam Mol Mech
Mutagen 378:51-63
Lim JM, Jeong JH, Lee JH et al (2011) The analysis of pm2.5 and associated elements and their
indoor/outdoor pollution status in an urban area. Indoor Air 21:145-155
Lin Z, Lee CK, Fong KF et al (2011) Comparison of annual energy performances with different
ventilation methods for temperature and humidity control. Energy Build 43:3599-3608
Liu G, Liu M (2012) Development of simplified in situ fan curve measurement method using the
manufacturers fan curve. Build Environ 48:77-83
Liu W-T, Hsieh H-C, Chen S-P et al (2012) Diagnosis of air quality through observation and
modeling
of
volatile
organic
compounds
(VOCs)
as
pollution
tracers.
Atmos
Environ
55:56-63
Lobscheid AB, Nazaroff WW, Spears M et al (2012) Intake fractions of primary conserved air
pollutants emitted from on-road vehicles in the United States. Atmos Environ 63:298-305
Longinelli A, Langone L, Ori C et al (2011) Atmospheric CO
2
concentrations and [delta] 13c
over
western
and
eastern
Mediterranean
basins
during
summer
2007.
Atmos
Environ
45:5514-5522
Lu W-Z, He H-D, Leung AYT (2011) Assessing air quality in Hong Kong: a proposed, revised air
pollution index (API). Build Environ 46:2562-2569
Madureira J, Mendes A, Santos H et al (2012) Evaluation of the indoor air quality in restaurants
before and after a smoking ban in Portugal. Indoor Built Environ 21:323-331
Makhoul A, Ghali K, Ghaddar N (2013) Desk fans for the control of the convection flow around
occupants using ceiling mounted personalized ventilation. Build Environ 59:336-348
Mansson L (1993) Demand controlled ventilating systems: case studies. In: IEA (ed)
Marion M, Tiffonnet AL, Santa-Cruz A et al (2011) Study of the resistances to transfer of gaseous
pollutant between material and indoor air. Build Environ 46:356-362
Markowski M, Trafczynski M, Urbaniec K (2013) Identification of the influence of fouling on the
heat recovery in a network of shell and tube heat exchangers. Appl Energy 102:755-764
Mavroidis I, Andronopoulos S, Bartzis JG (2012) Computational simulation of the residence of
air pollutants in the wake of a 3-dimensional cubical building. The effect of atmospheric
stability. Atmos Environ 63:189-202
Mendelsohn R, Orcutt G (1979) An empirical analysis of air pollution dose-response curves.
J Environ Econ Manage 6:85-106
