Civil Engineering Reference
In-Depth Information
Gminski R, Marutzky R, Kevekordes S et al (2011) Chemosensory irritations and pulmonary
effects of acute exposure to emissions from oriented strand board. Hum Exp Toxicol
30:1204-1221
Gong GC, Han B, Luo HF et al (2010) Research on the air stability of limited space. Int J Green
Energy 7:43-64
Guerra Santin O (2011) Behavioural patterns and user profiles related to energy consumption for
heating. Energy Build 43:2662-2672
Haas D, Galler H, Luxner J et al (2013) The concentrations of culturable microorganisms in
relation to particulate matter in urban air. Atmos Environ 65:215-222
Han K, Zhang JS, Wargocki P et al (2012) Model-based approach to account for the variation of
primary voc emissions over time in the identification of indoor voc sources. Build Environ
57:403-416
Hathway EA, Noakes CJ, Sleigh PA et al (2011) CFD simulation of airborne pathogen transport
due to human activities. Build Environ 46:2500-2511
Haverinen-Shaughnessy U (2012) Prevalence of dampness and mold in European housing stock.
J Expos Sci Environ Epidemiol 22:461-467
Haverinen-Shaughnessy U, Moschandreas DJ, Shaughnessy RJ (2011) Association between
substandard classroom ventilation rates and students' academic achievement. Indoor Air
21:121-131
Hayashi M, Osawa H (2008) The influence of the concealed pollution sources upon the indoor air
quality in houses. Build Environ 43:329-336
Hemingson HB, Simonson CJ, Besant RW (2011) Steady-state performance of a run-around
membrane energy exchanger (RAMEE) for a range of outdoor air conditions. Int J Heat Mass
Transf 54:1814-1824
Hillier K, King DA, Henneuse C (2009) Study of odours coming out of polyurethane flexible
foam mattresses. Cell Polym 28:113-144
Hodas N, Meng Q, Lunden MM et al (2012) Variability in the fraction of ambient fine particulate
matter found indoors and observed heterogeneity in health effect estimates. J Expos Sci
Environ Epidemiol 22:448-454
Hoffmann H-D, Schupp T (2009) Evaluation of consumer risk resulting from exposure against
diphenylmethane-4, 4
0
-diisocyanate (MDI) from polyurethane foam. Excli J 8:58-65
Hsu S-I, Ito K, Kendall M et al (2012) Factors affecting personal exposure to thoracic and fine
particles and their components. J Expos Sci Environ Epidemiol 22:439-447
Huang Y, Ho KF, Ho SSH et al (2011) Physical parameters effect on ozone-initiated formation of
indoor secondary organic aerosols with emissions from cleaning products. J Hazard Mater
192:1787-1794
Hun DE, Corsi RL, Morandi MT et al (2010) Formaldehyde in residences: long-term indoor
concentrations and influencing factors. Indoor Air 20:196-203
Hun DE, Corsi RL, Morandi MT et al (2011) Automobile proximity and indoor residential
concentrations of BTEX and MTBE. Build Environ 46:45-53
Hviid CA, Svendsen S Analytical and experimental analysis of a low-pressure heat exchanger
suitable for passive ventilation. doi:
10.1016/j.enbuild.2010.08.003
Hviid CA, Svendsen S (2013) Experimental study of perforated suspended ceilings as diffuse
ventilation air inlets. Energy Build 56:160-168
Hyttinen M, Rautio A, Pasanen P et al (2011) Airborne infection isolation rooms—a review of
experimental studies. Indoor Built Environ 20:584-594
IEA (2008a) Energy balances of non-OECD countries
IEA (2008b) Energy balances of OECD countries
IEA (2010) Co
2
emissions from fuel combustion, 2010 edn. IEA, Paris
Inthavong K, Tian ZF, Tu JY (2009) Effect of ventilation design on removal of particles in
woodturning workstations. Build Environ 44:125-136
ISO (2007) Hygrothermal performance of buildings—calculation and presentation of climatic
data—part 6: accumulated temperature differences (degree-days), Geneva
