Civil Engineering Reference
In-Depth Information
Lifting of masonry units
BSI (2005). Code of Practice for the Use of Masonry - Part 1: Structural
Use of Unreinforced Masonry. London: BSI, BS 5628-1.
BSI (2005). Code of Practice for the Use of Masonry - Part 3:
Materials and Components, Design and Workmanship. London:
BSI, BS 5628-3.
BSI (2005). Structural Design of Buildings - Part 2: Code of Practice
for Masonry Walls in Buildings. London: BSI, BS 8103-2.
BSI (2005).
UK National Annex to BS EN1996: Design of Masonry
Structures
. London: BSI, NA to BS EN1996-1.
BSI (2005).
UK National Annex to Eurocode 6: Design of Masonry
Structures
. London: BSI, NA to BS EN1996-1.
BSI (2006).
UK National Annex to Eurocode 6: Design of Masonry
Structures
. London: BSI, NA to BS EN1996-2.
BSI (2006).
UK National Annex to Eurocode 6: Design of Masonry
Structures
, London: BSI, NA to BS EN1996-3.
BSI (2009). Design of Masonry Structures - Part 3: Simplified
Calculation Methods for Unreinforced Masonry Structures.
London: BSI, BS EN1996-3.
BSI (2009). Eurocode 6: Design of Masonry Structures - Part
1-1: General Rules for Reinforced and Unreinforced Masonry
Structures. London: BSI, BS EN1996-1-1.
BSI (2009). Eurocode 6: Design of Masonry Structures - Part 2:
Design Considerations, Selection of Materials, and Execution of
Materials. London: BSI, BS EN1996-2.
BSI (2009). Eurocode 6: Design of Masonry Structures - Part
3: Simplified Calculation Methods for Unreinforced Masonry
Structures. London: BSI, BS EN1996-3.
BSI (2010).
Specification for Mortar for Masonry: Masonry Mortar
.
London: BSI, BS EN998-2:2010.
H.M. Government (2000).
Building Regulations Approved Document
A: Structure
. London: Office of the Deputy Prime Minister
H.M. Government (2000).
Building Regulations Approved Document
E: Resistance to the Passage of Sound
. London: Office of the
Deputy Prime Minister.
■
■
Working at height
Temporary stability of walls
■
■
Use of cements and lime mortars.
20.6 References
Adler, D. (ed.) (2000).
Metric Handbook Planning Design Data.
2nd
edn. Oxford: Butterworth-Heinemann.
Building Research Establishment (1994).
BRE Good Building Guide
14 - Building Simple Plan Brick or Block Freestanding Walls
.
Watford: IHS/BRE Press.
Building Research Establishment (1994).
BRE Good Building Guide
27 - Earth Retaining Walls
. Watford: IHS/BRE Press.
Chalson, A. (2008).
Seismic Design for Architects: Outwitting the
Quake.
Oxford: Elsevier.
Chudley, R. and Greeno, R. (2008).
Building Construction Handbook,
7th edn. Oxford: Butterworth-Heinemann.
Curtin, W. G., Shaw, G., Beck, J. K. and Bray, W. A. (1999).
Structural
Masonry Designers' Manual,
3rd edn. Oxford: Blackwell
Publishing.
IStructE (1996).
Appraisal of Existing Structures,
2nd edn. London:
IStructE.
IStructE (2008).
Manual for the Design of Plain Masonry in Building
Structures to Eurocode 6
. London: IStructE.
Thomas, K. (1996).
Masonry Walls: Specification and Design.
Oxford: Butterworth-Heinemann.
20.6.1 Standards and statutory instruments
BSI (2002).
Loading for Buildings - Code of Practice for Wind Loads
.
London: BSI, BS 6399-2.
BSI (2003).
Specification for Masonry Units - Part 1: Clay Masonry
Units
. London: BSI, BS EN771-1.
BSI (2003). Specification for Masonry Units - Part 3: Aggregate
Concrete Masonry Units (Dense and Light-Weight Aggregates).
London: BSI, BS EN771-1.
BSI (2003). Specification for Masonry Units - Part 4: Autoclaved
Aerated Concrete Masonry Units. London: BSI, BS EN771-1.
BSI (2003).
Specification for Masonry Units - Part 5: Manufactured
Stone Masonry Units
. London: BSI, BS EN771-5.
20.6.2 Useful web addresses
Brick Development Association - www.brick.org.uk
Building Research Establishment (BRE) - www.bre.co.uk