Graphics Reference
In-Depth Information
Bend
In addition to adding flanges and contour flanges, you can also bend a flat sheet using the
Bend
command. Activate the
Bend
command (click
Home > Bend > More > Bend
on the
ribbon) and click on the face to bend. Draw a sketch line on the flat sheet and click
Fin-
ish
on the ribbon. The flat sheet bends along the sketch line. On the
Bend
dialog, click the
Reverse Side
button to flip the bend side. Type-in a value in the
Angle
box to change the
folding angle. Click the
Reverse Direction
to reverse the folding direction. Select an option
from the
Inset
drop-down menu to define the material side of the bend feature. Click
OK
to
complete the bend feature.