Deformation of Metals - Electrically Assisted Forming - page 21

8. Kleiner M, Geiger M, Klaus A (2003) Manufacturing of lightweight components by metal
forming. CIRP Ann Manufact Technol 52(2):521-542. doi: 10.1016/S0007-8506(07)60202-9 ,
ISSN 0007-8506
9. Friesen F, Schwarz D, Cunat P-J (2002) Lightweight design with stainless steel. In:
Proceedings DYNAmore LS-DYNA Forum, Bad Mergentheim, D
10. Friebe E et al (2001) Hydro mechanical deep drawing of passenger car fuel tanks. In: Siegert K
(ed) Hydroforming of tubes, extrusions, and sheets, vol 2, MAT-INFO, Frankfurt, D, pp 193-213
11. Taub A, Krajewski P, Luo A, Owens J (2007) The evolution of technology for materials pro-
cessing over the last 50 years: the automotive example. JOM 59(2):48-57
12. American Iron and Steel Institute: 2009 Press Releases. http://www.steel.org/
13. www.mckinnesrolledrings.com
14. Ross CD, Kronenberger TJ, Roth JT (2009) Effect of DC on the formability of Ti-6AL-4V. J
Eng Mater Technol 131(3):11
15. Ji YH, Park JJ (2008) Formability of magnesium AZ31 sheet in the incremental forming at
warm temperature. J Mater Pro Technol 201:354-358
16. Golovashchenko SF, Krause A, Gillard AJ (2005) Incremental forming for aluminum auto-
motive technology. In: ASME 2005 International Mechanical Engineering Congress and
Exposition, IMECE2005-81069, p 7
17. Kalpakjian S (1997) Superplastic Forming. Manufacturing Processes for Engineering
Materials, Third Edition, pp 421-422
18. Kinsey B, Cao J (2003) An analytical model for tailor welded blank forming. J Manuf Sci
Eng 125:344-351
19. Center for Automotive Research (2011) Automotive technology: greener products, changing
skills, lightweight materials & forming report. Driving Change Project
20. Bandivadekar A, Bodek K, Cheah L, Evans C, Groode T, Heywood J et al (2008) On the
road in 2035: reducing transportation's petroleum consumption and GHG emissions.
Massachusetts Institute of Technology
21. Callister WD (2007) Materials science and engineering: an introduction, 7th edn. Wiley, New
York
22. Askeland DR, Phule PP (2006) The science and engineering of materials, 5th edn.
Addison-Wesley
23. Kalpakjian S (1997) Manufacturing processes for engineering materials, 3rd edn. Springer
Science & Business Media, 2000
24. Banabic D, Bunge HJ, Pohlandt K, Tekkaya AE (2000) Formability of metallic materials.
Springer, London
25. Xu Y (2004) Universal formability technology and applications. Mater Process Technol
151:119-125
26. Keeler SP, Backofen, WA (1964) Plastic instability and fracture in sheets stretched over rigid
punches. ASM Trans Q 56:25-48
27. Goodwin GM (1968) Application of strain analysis to sheet metal forming problems in the
press shop. SAE Technical Paper