Civil Engineering Reference
In-Depth Information
5. (2006) MS thesis, 'Microforming and Ultrasonic Forming', North Carolina State University
6. Salandro WA (2012) Thermo-mechanical modeling of the electrically-assisted manufacturing
(EAM) technique during open die forging. PhD dissertation, Clemson University
7. Uppal AH, Probert SD (1972) Mean separation and real contact area between surfaces
pressed together under high static loads. Wear 23:39-53
8. Pullen J, Williamson JBP (1972) On the plastic contact of rough surfaces. Proc R Soc Math
Phys Eng Sci 327:159-173. doi:
10.1098/rspa.1972.0038
9. Kragelsky IV, Demkin NB (1960) Contact area of rough surfaces. Wear 3:170-187
10. Stewart M (1990) A new approach to the use of the bearing area curve. In: International con-
ference on honing technologies and applications, FC90-229, pp 11
11. Uppal AH, Probert SD (1972) Considerations governing the contact between a rough and a
flat surface. Wear 22:215-234
12. Boyer L (2001) Contact resistance calculations: generalizations of greenwood's formula
including interface films. IEEE Trans Compon Packag Technol 24:50-58
13. Bunget C, Salandro WA, Mears L (2010) Tribological aspects in electrically-assisted form-
ing. In: International manufacturing science and engineering conference, MSEC 2010-34249,
p 8
14. Bunget C, Salandro WA, Mears L (2010) Evaluation of lubricants for electrically-assisted
forming. Proc Inst Mech Eng Part B: J Eng Manuf. doi:
10.1177/0954405411401267
15. Schey JA (1983) Tribology in metalworking. American Society for Metals
16. Altan T, Ngaile G, Sheng G (2004) Cold and hot forging; fundamentals and applications.
ASM International
17. Gariety M, Ngaile G, Altan T (2007) Evaluation of new cold forging lubricants without zinc
phosphate precoat. Int J Mach Tools Manuf 47:673-681
18. Ngaile G, Botz F (2008) Performance of graphite and boron-nitride-silicone based lubricants
and associated lubrication mechanisms in warm forging of aluminum. J Tribol 130:7
19. Ngaile G, Cochran J, Stark D (2007) Formulation of polymer-based lubricant for metal form-
ing. Proc IMechE Part B: J Eng Manuf 221:559-568
20. Perkins TA, Kronenberger TJ, Roth JT (2007) Metallic forging using electrical flow as an
alternative to warm/hot working. J Manuf Sci Eng 129(1):84-94
21. Bunget C, Salandro WA, Mears L, Roth JT (2010) Energy-based modeling of an electrically-
assisted forging process. Trans North Am Manuf Res Inst SME 38:647-654
