Agriculture Reference
In-Depth Information
When nearing the end of the wire, wrap the wire back around the main wire and twist until
tight. If a pair of needle-nose pliers is available, then they can be used to twist the wires
more tightly. The finished electrode will look something like this:
Wire Wrapped Once Around the Head
Do this for both wires.
After you attach each wire to its respective nail, you should have two electrodes wired up.
To guarantee the best electrical connection over time, it would be best to solder the wires
to the electrode[^FootCordPolarity]. I recommend you check out the following tutorial for
more information:
Note:Solderingtoanailorscrew,especiallyalargeone,mayrequirelotsofheat,inwhich
case using a torch may be better than using a soldering iron.
