Standards for LAN Wiring - LAN Wiring - page 495

EIA/TIA-607 (2002) Commercial Building Grounding (Earthing)

and Bonding Requirements for
Telecommunications (ANSI/TIAEIA-J-STD-
607)

Note: The term TSB was formerly “Technical Systems Bulletin” when these standards
were managed by the EIA. The TIA term was changed to “Telecommunications
Systems Bulletin” for TIA standard supplements, beginning with TBSs issued after
the 568-A revision to the primary commercial cabling standard.
All of the above EIA/TIA standards shown are approved by the American
National Standards Institute (ANSI).

IEEE (Institute of Electrical and Electronic Engineers) Standards

IEEE/ISO 8802-3 (IEEE 802.3) Information Technology—Local and Metropolitan
Area Networks—Part 3: Carrier Sense Multiple Access with Collision Detection
(CSMA/CD) Access Method and Physical Layer Specifications (and Supplements J,
K, L, and P-Q)

IEEE/ISO 8802-5 (IEEE 802.5) Information Technology—Local and Metropolitan
Area Networks—Part 5: Token Ring Access Method and Physical Layer
Specifications (and Supplements B, C, and J)

IEEE 802.11 Wireless LAN Medium Access Control (MAC) and Physical Layer
(PHY) Specifications —commonly known as WiFi

IEEE 802.12 Standard for Demand Priority Access Method. Physical Layer and
Repeater Specifications for 100 Megabits per Second Operation

IEEE 802.16 Air Interface for Fixed Broadband Wireless Access Systems —com-
monly known as WiMAX

Note: IEEE Standards 802.2, 802.3, 802.4, 802.5, and 802.6 are now ISO-approved
and have been renumbered to match the ISO numbering system.

ISO/IEC (International Standards Organization/International
Electrotechnical Commission) Standards

IEC 603-7 Connectors for frequencies below 3 MHz for use with printed boards

IEC 807-8 Rectangular Connectors for Frequencies below 3 MHz, Part 8: Detail
Specification for Connectors, Four-Signal Contacts, and Earthing Contacts for
Cable, First Edition