Civil Engineering Reference
In-Depth Information
′
WK
α
r
⎛
⎞
(
)
−+
qmr
w
=
⋅
F
⋅
e
.
(4.80)
⎜
⎟
d
0
2
π
rc h
h
⎝
⎠
0
-10.0
Ceiling:
α
= 0.5
Floor:
α
= 0.05
Scat. elements:
α
=0.01
q
= 0.025
-20.0
-30.0
6 dB/doubling
-40.0
Total
Scattered
Direct
-50.0
-60.0
1.0
10.0
100.0
23 5 0 0 0
Distance (m)
Figure 4.22
The relative sound pressure level as a function of distance from a source in a “flat” room.
Contributions from scattered and non-scattered sound according to a model of Jovicic (1979). The room is 5
metres high.
4.8.1.3
Total energy density. Predicted results
The total energy density at a given distance from the source is then given by Equation
some examples on using this equation where we, as in section
4.5.1.4,
shall depict the
relative sound pressure level, the difference between the sound pressure level
L
p
and the
source sound power level
L
w
, as a function of the source-receiver distance. Assuming
that the sound field is an assembly of plane waves having an intensity
w
⋅
c
0
, we arrive at
the ordinate for these curves by calculating the quantity 10⋅lg(
w
⋅
c
0
/
W
).
The room height is chosen equal to 5 metres in all predictions shown. Furthermore,
for simplicity the air absorption is put equal to zero.
Figure 4.22
shows the total relative
sound pressure level together with the separate contributions due to
w
d
and
w
s
for a room
having a relatively small number of scattering objects;
q
is chosen equal to 0.025 m
-1
. At
large distances from the source, however, the level is still determined by the scattered
field. For the sake of comparison, we have added a line representing the free field
“distance law” for a monopole source, a 6 dB decrease per doubling of the distance. It
should be obvious that one cannot apply any kind of “distance law”, i.e. a constant
number of decibels per distance doubling, in such rooms.
The next two figures show the total relative sound pressure level only but with
different values for the absorption factor of the ceiling (see
Figure 4.23)
and in the mean
scattering cross section
q
(see
Figure 4.24
). It should be noted that, even if the absorption
exponents are entering into the equations above, the absorption factors
α
are used as
input data when calculating the results.
