Graphics Reference
In-Depth Information
5.
On the ribbon, click
Home > Feature > Hole
.
6.
On the
Hole
dialog, select
Type > General Hole
.
7.
Under the
Form and Dimensions
section, select
Form > Countersunk
.
8.
Set the
C-Sink Diameter
and
C-Sink Angle
values to
24
and
82
, respect-
ively.
9.
Set the
Diameter
value to
20
mm.
10.
Set the
Depth Limit
value to
Through Body
.
11.
Click on the right-side face of the part geometry. A point is placed on the
selected face.
12.
Add dimensions to define the point location. Click
Finish
on the ribbon.
13.
Click
OK
to complete the hole feature.
