If you want a chamfer to have different setbacks on both sides of the edge, then select
Cross Section > Asymmetric on the dialog. Type-in values in the Distance 1 and Distance
2 boxes on the dialog and select the edge to chamfer. If you want to switch the setback dis-
tance, then click the Reverse Direction button on the dialog.
Offset and Angle chamfer
This option lets you to create a chamfer by defining its distance and angle values. On the
Chamfer dialog, select Cross Section > Offset and Angle and click on the edge to cham-
fer. Type-in values in the Distance and Angle boxes and click OK .